Rotating Cube Shelf 2

coolachlanke·rotating-smart-shelf·CAD/Electrical/KiCAD/RCS_LogicBoard/Rotating_Cube_Shelf_2.kicad_pcb

Rotating Cube Shelf 2 PCB layout, top view — open source ESP32 board by coolachlanke

About the Rotating Cube Shelf 2 PCB

Rotating Cube Shelf 2 is an open source ESP32 PCB design by coolachlanke, published on GitHub. It is a 4-layer board measuring 60 × 108.8 mm, with 71 components from 31 distinct parts.

Its main chip is the C82899, from the ESP32 family. Other key parts include the C10002, C6186 and Pololu_Breakout_A4988. By type, the board carries 22 resistors, 14 capacitors, 10 diodes, 8 connectors, 5 transistors and 3 ICs.

It belongs with the iot & wireless, displays & leds and robotics & motion designs in this gallery.

From the project

Smart display shelf with three independent rotating platforms and dynamic LED rings. Controlled wirelessly via ESP32 + WiFi over a custom web application.

Motorised display shelf for Rubik’s Cubes and other collectibles, powered by ESP32-C3 and WS2812B RGB LEDs. Designed for showpieces, timed rotations and eye-catching animations.

- Microcontroller: ESP32-C3 (BLE, WiFi) - PCBs: Custom power distrubution/driver/logic board + annular 48-pixel WS21812B carrier board. All designed in KiCAD 8. - Motors: NEMA17 bipolar stepper motors with A4988 drivers - Power: 9V barrel input with onboard 5V & 3V3 voltage regulation - Firmware: Custom C++ firmware utiliting FreeRTOS built with PlatformIO (Arduino framework) - Lighting: WS2812B addressable RGB LED…

Main components on the Rotating Cube Shelf 2

Rotating Cube Shelf 2 bill of materials (BOM)

71 components, 31 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
C10002
LM2596S-5
U1
1
C82899
ESP32-WROOM-32
U2
1
C6186
AMS1117-3.3
U3
3
Pololu_Breakout_A4988
A1, A2, A3
5
C52801
BC817
Q1, Q2, Q3, Q4, Q5
1
C136744
Barrel_Jack_Switch
J1
3
C157925
Conn_01x04
J2, J3, J4
3
C161870
Conn_01x03
J5, J6, J7
1
C2691448
Conn_01x04_Pin
J8
2
C455243
SW_Push
SW1, SW2
3
TestPoint
TP1, TP2, TP3
1
C8678
SS34
D1
3
C965815
LED (GRE)
D2, D3, D4
3
C965812
LED (RED)
D5, D8, D9
2
C965817
LED (BLU)
D6, D10
1
C965814
LED (YEL)
D7
1
C9400
33u
L1
3
C116241
100u
C1, C5, C9
1
C340751
680u
C2
1
C1848
1u
C3
Show 11 more
QtyPartRefs
1
C125977
220u
C4
2
C4747971
10u
C6, C8
2
C28233
0.1u
C7, C12
3
C1588
0.1u
C10, C11, C13
1
C19702
10u
C14
6
C21189
0R
R1, R2, R3, R19, R20, R21
2
C23179
750R
R4, R22
1
C22940
2k4
R5
1
C4260
6k2
R6
8
C21190
1k
R7, R8, R9, R10, R15, R16, R17, R18
4
C25804
10k
R11, R12, R13, R14

Rotating Cube Shelf 2 design files

The KiCad project lives in the coolachlanke/rotating-smart-shelf repository on GitHub; these links point at the commit this page was built from.

Rotating Cube Shelf 2: common questions

What microcontroller does the Rotating Cube Shelf 2 use?

The Rotating Cube Shelf 2 is built around the C82899, from the ESP32 family.

How big is the Rotating Cube Shelf 2 PCB?

The Rotating Cube Shelf 2 measures 60 × 108.8 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Rotating Cube Shelf 2?

71 components, from 31 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Rotating Cube Shelf 2 design files?

From the coolachlanke/rotating-smart-shelf repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Rotating Cube Shelf 2 design in my own project?

The repository has no license, so all rights stay with coolachlanke. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Rotating Cube Shelf 2 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in rotating-smart-shelf

Similar boards