Copperhead

copperheadhq·copperhead·manual-tests/real-designs/examples/kit-dev-coldfire-xilinx_5213/drawn/board.kicad_sch

This repository ships a schematic but no board layout.

About the Copperhead PCB

Copperhead is an open source PCB design by copperheadhq, published on GitHub under the Apache-2.0 license. It is a board, with 160 components from 56 distinct parts.

Other key parts include the 74AHC1G14, MCF5213-LQFP100, 74HC125, MAX202 and PCA82C251. By type, the board carries 51 capacitors, 44 resistors, 8 ICs, 7 LEDs, 5 diodes and 4 connectors.

From the project

Hardware as fast as software.

Real boards the engine drafts cleanly, kept in the repo so the side-by-side comparison is browsable without installing KiCad's demos or running the sweep. Everything here is a verbatim copy of one sweep run's output: the report, the renders, the drafted schematic, and the IR the netlist reduced to.

Every board here drafts with connectivity exact (lost=0, gained=0), and every one carries a licence that permits redistribution. "KiCad demo" means a board with no licence file of its own that the KiCad project distributes in the kicad-demos package; those are included on that provenance.

Main components on the Copperhead

Copperhead bill of materials (BOM)

160 components, 56 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
74AHC1G14
U101
1
MCF5213-LQFP100
U102
1
74HC125
U201
3
MAX202
U202, U203, U204
1
PCA82C251
U205
1
XCR3256-TQ144
U301
1
3906
Q101
1
8MHz
Y101
1
JACK_2P
J201
1
CONN_6
P301
1
CONN_2X2
P302
1
CONN_20X2
P303
2
SW_PUSH
ABRT_SW101, RST_SW101
6
CONN_1
ALLPST101, CLKOUT101, GND101, RS201, TA-101, VREF201
1
CONN_13X2
BDM_PORT101
1
CONN_2X2
CAN_EN201
4
JUMPER
CAN_TERM201, CT101, VDDA101, VX_EN201
3
CONN_3
COM_SEL201, COM_SEL202, COM_SEL203
1
FUSE
F201
1
JUMPER_TRIPLE
JP101
Show 36 more
QtyPartRefs
1
JUMPER
JP201
1
DS1818
LV101
1
CONN_30X2
MCU_PORT201
4
CONN_4X2
PULUPEN201, UART_EN201, UART_EN202, UART_EN203
2
R
RCAN201, RCAN202
2
SW_PUSH
SW201, SW202
1
SWITCH_INV
SW_ONOFF201
1
CONN_2
TB201
3
DB9
UARTCAN201, UARTCAN202, UARTCAN203
1
LT1129_QPACK
VR201
5
LED
LED201, LED202, LED203, LED204, LED205
2
LED_RED
LEDABRT101, LED_RST101
2
BAT54
D101, D102
1
1N4004
D201
2
LED
D301, D302
1
BEAD
FB101
2
10uH
L101, L102
43
100nF
C101, C103, C104, C109, C110, C111, C112, C113 +35
2
1nF
C102, C105
2
10pF
C106, C107
1
10uF
C108
1
100uF
C119
1
10uF
C212
1
220uF
C215
13
4,7K
R101, R102, R106, R107, R108, R109, R110, R111 +5
7
270
R103, R116, R202, R203, R204, R206, R207
4
1K
R104, R210, R303, R304
1
20K
R105
1
0
R113
1
22
R114
1
4.7K
R115
12
10K
R117, R118, R119, R120, R121, R122, R123, R124 +4
1
1M
R125
1
62
R209
1
4K7
R301
1
3,3
R302

Copperhead design files

The KiCad project lives in the copperheadhq/copperhead repository on GitHub; these links point at the commit this page was built from.

Copperhead: common questions

How many components are on the Copperhead?

160 components, from 56 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Copperhead design files?

From the copperheadhq/copperhead repository on GitHub, which has the schematic and the BOM; the links under Design files point to each one.

Can I use the Copperhead design in my own project?

Yes, under the terms of its Apache-2.0 license, which copperheadhq chose for the repository.