14 open source boards using the MAX202

Real designs built with the MAX202, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

14 boardsClear filters|Most starred

How designs wire the MAX202

Read from the KiCad layouts of 12 open source designs, one per repository: what each pin of the MAX202 connects to, and the resistors, capacitors and other passives placed on it.

  • The C1+ pin has a series capacitor on 12 of 12 designs, most often 100 nF (then 1 µF).
  • The C1- pin has a series capacitor on 12 of 12 designs, most often 100 nF (then 1 µF).
  • The C2+ pin has a series capacitor on 12 of 12 designs, most often 100 nF (then 1 µF).
  • The C2- pin has a series capacitor on 12 of 12 designs, most often 100 nF (then 1 µF).
C1+pin 1Connected to: Signal 100%
  • Series capacitor on 100% · 100 nF (10), 1 µF (2)
V+pin 2Connected to: Signal 100%
  • Capacitor to the supply on 83% · 100 nF (9), 1 µF (1)
C1-pin 3Connected to: Signal 100%
  • Series capacitor on 100% · 100 nF (10), 1 µF (2)
C2+pin 4Connected to: Signal 100%
  • Series capacitor on 100% · 100 nF (10), 1 µF (2)
C2-pin 5Connected to: Signal 100%
  • Series capacitor on 100% · 100 nF (10), 1 µF (2)
V-pin 6Connected to: Signal 100%
  • Capacitor to GND on 92% · 100 nF (10), 1 µF (1)
T2INpin 10Connected to: Signal 83% · not connected 17%
  • Resistor to GND on 50% · 10 kΩ (6)
GNDpin 15Connected to: GND 100%
VCCpin 16Connected to: 3.3V 100%
  • Decoupling capacitor on 67% · 100 nF (7), 1 µF (1)
  • Capacitor on 58% · 100 nF (7)

7 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Kicad color schemes by pointhi, Coldfire by claynicholson, Zeta sbc by skiselev and Yddraig by ddraig68k.

The MAX202 in open source designs

The gallery holds 14 open source boards using the MAX202 from 13 GitHub repositories; a typical one measures about 157.5 × 91.4 mm and carries around 157 components.

55% use four copper layers or more, and 64% carry an open source license.

The most starred is Kicad color schemes by pointhi.

Microcontrollers on boards using the MAX202

What boards using the MAX202 are built for

MAX202: common questions

Where can I find a MAX202 reference design?

Each of the 14 boards on this page is a real design using the MAX202. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the MAX202 C1+ pin connected?

The C1+ pin has a series capacitor on 12 of 12 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 12 open source designs using the MAX202.

How is the MAX202 C1- pin connected?

The C1- pin has a series capacitor on 12 of 12 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 12 open source designs using the MAX202.

How is the MAX202 C2+ pin connected?

The C2+ pin has a series capacitor on 12 of 12 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 12 open source designs using the MAX202.

What parts are used alongside the MAX202?

The 74AHC1G14, 74HC125, MCF5213-LQFP100, PCA82C251 and XCR3256-TQ144 appear in the most repositories here.

Which microcontrollers do boards using the MAX202 use?

Most are built on NXP (1) and PIC (1).

How big is a typical board using the MAX202?

The median is 157.5 × 91.4 mm, and 45% are two-layer designs.

What is the most popular open source board using the MAX202?

By GitHub stars, Kicad color schemes by pointhi, with 716 stars.

Can I simulate one of these boards using the MAX202 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part