7 open source boards using the MCF5213-LQFP100
Real designs built with the MCF5213-LQFP100, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Kicad color schemes
pointhi
157.5 × 91.4 mm162 partsCC0-1.0716- schematic only · 160 parts
Copperhead
copperheadhq
160 partsApache-2.0669 Prueba kicad-2
alvaro-salazar
157.5 × 91.4 mm157 parts4LNo license0Kit dev coldfire xilinx 5213
nickradfc
157.5 × 91.4 mm157 parts4LNo license0Coldfire
claynicholson
157.5 × 91.4 mm157 parts4LMIT102Kit dev coldfire xilinx 5213
nickradfc
157.5 × 91.4 mm157 parts4LNo license0Kit dev coldfire xilinx 5213
circuitly
157.5 × 91.4 mm157 parts4LNo license0
How designs wire the MCF5213-LQFP100
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the MCF5213-LQFP100 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pins have a decoupling capacitor on 6 of 6 designs, most often 100 nF.
- The TEST pin has a resistor to GND on 6 of 6 designs, most often 0 Ω.
- The RCON/EZPCS pin has a pull-up to 3.3V on 6 of 6 designs, most often 4.7 kΩ.
- The JTAG_EN pin has a pull-up to 3.3V on 6 of 6 designs, most often 4.7 kΩ.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VCCpin 1, 2, 14, 22, 23, 34, 41, 57, 68, 81, 93 | Connected to: 3.3V 100% |
|
| GNDpin 3, 15, 24, 25, 35, 42, 56, 67, 75, 82, 92 | Connected to: GND 100% | — |
| TESTpin 5 | Connected to: Signal 100% |
|
| RCON/EZPCSpin 21 | Connected to: A connector 33% |
|
| JTAG_ENpin 26 | Connected to: Signal 100% |
|
| CLKMOD1pin 39 | Connected to: Signal 100% |
|
| CLKMOD0pin 40 | Connected to: Signal 100% |
|
| VSSApin 47 | Connected to: GND 100% | — |
| VRLpin 48 | Connected to: GND 100% | — |
| VRHpin 49 | Connected to: VCCA 100% |
|
| VCCApin 50 | Connected to: VCCA 100% |
|
| VSTBYpin 55 | Connected to: 3.3V 100% |
|
| TCLK/PSTCLK/CLKOUTpin 64 | Connected to: Signal 100% |
|
| GNDPLLpin 71 | Connected to: GND 100% | — |
| XTALpin 72 | Connected to: XCR3256-TQ144 100% |
|
| CLKIN/EXTALpin 73 | Connected to: Signal 100% |
|
| VCCPLLpin 74 | Connected to: VDDPLL 100% |
|
| BKPT/TMSpin 76 | Connected to: A connector 33% |
|
| DSI/TDIpin 79 | Connected to: A connector 33% |
|
| DSO/TDOpin 80 | Connected to: A connector 33% |
|
| DSCLK/TRSTpin 85 | Connected to: A connector 33% |
|
| IRQ1/PNQ1/SYNCA/PWM1pin 87 | Connected to: XCR3256-TQ144 100%, a connector 33% |
|
| IRQ2/PNQ2pin 88 | Connected to: XCR3256-TQ144 100%, a connector 33% |
|
| IRQ3/PNQ3pin 89 | Connected to: XCR3256-TQ144 100%, a connector 33% |
|
| IRQ4/PNQ4pin 90 | Connected to: A connector 33% |
|
| IRQ5/PNQ5pin 91 | Connected to: A connector 33% |
|
| IRQ6/PNQ6pin 94 | Connected to: A connector 33% |
|
| IRQ7/PNQ7pin 95 | Connected to: A connector 33% |
|
| RSTIpin 96 | Connected to: A connector 33% |
|
| RSTOpin 97 | Connected to: A connector 33% |
|
50 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Kicad color schemes by pointhi, Coldfire by claynicholson, Prueba kicad-2 by alvaro-salazar and Kit dev coldfire xilinx 5213 by circuitly.
The MCF5213-LQFP100 in open source designs
The gallery holds 7 open source boards using the MCF5213-LQFP100 from 7 GitHub repositories; a typical one measures about 157.5 × 91.4 mm and carries around 157 components.
100% use four copper layers or more, and 43% carry an open source license.
The most starred is Kicad color schemes by pointhi.
Parts used alongside the MCF5213-LQFP100
MCF5213-LQFP100: common questions
Where can I find a MCF5213-LQFP100 reference design?
Each of the 7 boards on this page is a real design using the MCF5213-LQFP100. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the MCF5213-LQFP100 VCC pin?
The VCC pins have a decoupling capacitor on 6 of 6 designs, most often 100 nF. Counted from the KiCad layouts of 6 open source designs using the MCF5213-LQFP100.
What resistor goes on the MCF5213-LQFP100 TEST pin?
The TEST pin has a resistor to GND on 6 of 6 designs, most often 0 Ω. Counted from the KiCad layouts of 6 open source designs using the MCF5213-LQFP100.
What pull-up resistor is used on the MCF5213-LQFP100 RCON/EZPCS pin?
The RCON/EZPCS pin has a pull-up to 3.3V on 6 of 6 designs, most often 4.7 kΩ. Counted from the KiCad layouts of 6 open source designs using the MCF5213-LQFP100.
What parts are used alongside the MCF5213-LQFP100?
The 74AHC1G14, 74HC125, MAX202, PCA82C251 and XCR3256-TQ144 appear in the most repositories here.
How big is a typical board using the MCF5213-LQFP100?
The median is 157.5 × 91.4 mm, and 0% are two-layer designs.
What is the most popular open source board using the MCF5213-LQFP100?
By GitHub stars, Kicad color schemes by pointhi, with 716 stars.
Can I simulate one of these boards using the MCF5213-LQFP100 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.