45 open source boards using the 74AHC1G14
Real designs built with the 74AHC1G14, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Kicad color schemes
pointhi
157.5 × 91.4 mm162 partsCC0-1.0716- schematic only · 160 parts
Copperhead
copperheadhq
160 partsApache-2.0669 Sdmux4
hnz1102
68.3 × 57.7 mm115 parts2LMIT16Pwmcontroller
mtreinish
35.1 × 44.5 mm17 parts2LCERN-OHL-1.25Shared usb memory
hnz1102
50 × 40 mm83 parts2LNo license2PIC
Project-2537 5b7a 0023-Led driver
kmahabeer
88.9 × 81.3 mm174 parts2LNo license1Kit dev coldfire xilinx 5213
nickradfc
157.5 × 91.4 mm157 parts4LNo license0Prueba kicad-2
alvaro-salazar
157.5 × 91.4 mm157 parts4LNo license0Mgc
0x007E
92.7 × 62.2 mm108 parts2LCC-BY-NC-4.00Silicon Labs
Ahriman
matt001k
52.7 × 61.5 mm107 parts4LNo license0FPGA
DragonATXProto
jimbro1000
169.7 × 229.8 mm102 parts2LNo license0SequentialClamping
Staybq
106.5 × 56.5 mm98 parts2LNo license0STM32
Schematics v11
roberto314
100 × 100 mm89 parts2LBSD-2-Clause0AVR/Arduino
Mgc m16a
0x007E
33 × 48.9 mm44 parts2LCC-BY-NC-4.00Coldfire
claynicholson
157.5 × 91.4 mm157 parts4LMIT102Sdcdmuxemmc
hnz1102
68.3 × 57.8 mm107 parts2LMIT16Sd mux
3mdeb
50 × 114 mm48 parts2LApache-2.08BE6502
89Mods
139.2 × 112.3 mm60 parts4LMIT3Sd mux
emaste
50 × 114 mm48 parts2LApache-2.02Sd mux
3mdeb
50 × 114 mm48 parts2LApache-2.01Stencil
jerry-kerenzikov
82 × 80 mm169 parts4LCERN-OHL-S-2.00Kit dev coldfire xilinx 5213
circuitly
157.5 × 91.4 mm157 parts4LNo license0Kit dev coldfire xilinx 5213
nickradfc
157.5 × 91.4 mm157 parts4LNo license0STM32
RamRomBoard
roberto314
100 × 100 mm86 parts2LBSD-2-Clause0FPGA
Zx50 Cpu RevC4
mmosko
133.5 × 100.3 mm85 parts6LNo license0Fuse
Staybq
165.1 × 80.7 mm80 parts2LNo license068k8-boad
Lintaroh
165 × 135 mm77 parts2LMIT0Sd mux
capotosto
50 × 114 mm48 parts2LApache-2.00Sd mux
agners
50 × 114 mm48 parts2LApache-2.00Sd mux
moto-timo
50 × 114 mm48 parts2LApache-2.00STM32
RAMROM 512k board
roberto314
100 × 100 mm54 parts2LNo license1AVR/Arduino
Controller
kuellenberg
213 × 24 mm82 parts2LNo license0FPGA
Alu
jerry-kerenzikov
100 × 51.9 mm78 parts4LCERN-OHL-S-2.00Fuse GD
Staybq
115.6 × 33.7 mm74 parts2LNo license08-bit register
jerry-kerenzikov
100 × 51.9 mm65 parts4LCERN-OHL-S-2.00Memory 64K
jerry-kerenzikov
100 × 51.9 mm59 parts4LCERN-OHL-S-2.00
How designs wire the 74AHC1G14
Read from the KiCad layouts of 28 open source designs, one per repository: what each pin of the 74AHC1G14 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 19 of 28 designs, most often 100 nF (then 4.7 µF).
- Pin 2 has a capacitor to GND on 12 of 28 designs, most often 100 nF (then 100 µF).
- Pin 2 has a pull-up to 3.3V on 12 of 28 designs, most often 10 kΩ (then 1 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| NCpin 1 | Connected to: Not connected 100% | — |
| Pin 2 | Connected to: FT245RL 21%, TS3A27518E 21% |
|
| GNDpin 3 | Connected to: GND 96% | — |
| VCCpin 5 | Connected to: 3.3V 100% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Kicad color schemes by pointhi, Coldfire by claynicholson, Sdcdmuxemmc by hnz1102 and Sd mux by 3mdeb.
The 74AHC1G14 in open source designs
The gallery holds 45 open source boards using the 74AHC1G14 from 29 GitHub repositories; a typical one measures about 100 × 91.4 mm and carries around 77 components.
65% are two-layer designs, the rest use four layers or more, and 47% carry an open source license.
The most starred is Kicad color schemes by pointhi.
Parts used alongside the 74AHC1G14
Microcontrollers on boards using the 74AHC1G14
What boards using the 74AHC1G14 are built for
74AHC1G14: common questions
Where can I find a 74AHC1G14 reference design?
Each of the 45 boards on this page is a real design using the 74AHC1G14. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74AHC1G14 VCC pin?
The VCC pin has a decoupling capacitor on 19 of 28 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 28 open source designs using the 74AHC1G14.
How is the 74AHC1G14 pin 2 connected?
Pin 2 has a capacitor to GND on 12 of 28 designs, most often 100 nF (then 100 µF). Counted from the KiCad layouts of 28 open source designs using the 74AHC1G14.
What parts are used alongside the 74AHC1G14?
The 74HC125, MAX202, MCF5213-LQFP100, PCA82C251 and TS3USB30EDGSR appear in the most repositories here.
Which microcontrollers do boards using the 74AHC1G14 use?
Most are built on STM32 (5), FPGA (3), AVR/Arduino (2) and PIC (1).
How big is a typical board using the 74AHC1G14?
The median is 100 × 91.4 mm, and 65% are two-layer designs.
What is the most popular open source board using the 74AHC1G14?
By GitHub stars, Kicad color schemes by pointhi, with 716 stars.
Can I simulate one of these boards using the 74AHC1G14 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.