7 open source boards using the PCA82C251
Real designs built with the PCA82C251, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Kicad color schemes
pointhi
157.5 × 91.4 mm162 partsCC0-1.0716- schematic only · 160 parts
Copperhead
copperheadhq
160 partsApache-2.0669 Prueba kicad-2
alvaro-salazar
157.5 × 91.4 mm157 parts4LNo license0Kit dev coldfire xilinx 5213
nickradfc
157.5 × 91.4 mm157 parts4LNo license0Coldfire
claynicholson
157.5 × 91.4 mm157 parts4LMIT102Kit dev coldfire xilinx 5213
nickradfc
157.5 × 91.4 mm157 parts4LNo license0Kit dev coldfire xilinx 5213
circuitly
157.5 × 91.4 mm157 parts4LNo license0
How designs wire the PCA82C251
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the PCA82C251 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF.
- The CAN- pin has a series resistor on 6 of 6 designs, most often 62 Ω.
- The RSL pin has a resistor to GND on 6 of 6 designs, most often 1 kΩ.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 2 | Connected to: GND 100% | — |
| VCCpin 3 | Connected to: 3.3V 100% |
|
| CAN-pin 6 | Connected to: A connector 33% |
|
| CAN+pin 7 | Connected to: A connector 33% |
|
| RSLpin 8 | Connected to: A connector 33% |
|
3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Kicad color schemes by pointhi, Coldfire by claynicholson, Prueba kicad-2 by alvaro-salazar and Kit dev coldfire xilinx 5213 by circuitly.
The PCA82C251 in open source designs
The gallery holds 7 open source boards using the PCA82C251 from 7 GitHub repositories; a typical one measures about 157.5 × 91.4 mm and carries around 157 components.
100% use four copper layers or more, and 43% carry an open source license.
The most starred is Kicad color schemes by pointhi.
Parts used alongside the PCA82C251
PCA82C251: common questions
Where can I find a PCA82C251 reference design?
Each of the 7 boards on this page is a real design using the PCA82C251. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the PCA82C251 VCC pin?
The VCC pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF. Counted from the KiCad layouts of 6 open source designs using the PCA82C251.
What resistor goes on the PCA82C251 CAN- pin?
The CAN- pin has a series resistor on 6 of 6 designs, most often 62 Ω. Counted from the KiCad layouts of 6 open source designs using the PCA82C251.
What resistor goes on the PCA82C251 RSL pin?
The RSL pin has a resistor to GND on 6 of 6 designs, most often 1 kΩ. Counted from the KiCad layouts of 6 open source designs using the PCA82C251.
What parts are used alongside the PCA82C251?
The 74AHC1G14, 74HC125, MAX202, MCF5213-LQFP100 and XCR3256-TQ144 appear in the most repositories here.
How big is a typical board using the PCA82C251?
The median is 157.5 × 91.4 mm, and 0% are two-layer designs.
What is the most popular open source board using the PCA82C251?
By GitHub stars, Kicad color schemes by pointhi, with 716 stars.
Can I simulate one of these boards using the PCA82C251 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.