CopperPilotDrone
CopperPilot·CopperPilotDronePCB·pcb/CopperPilotDrone.kicad_pcb
About the CopperPilotDrone PCB
CopperPilotDrone is an open source ESP32 PCB design by CopperPilot, published on GitHub under the CERN-OHL-P-2.0 license. It is a 2-layer board measuring 100 × 100 mm, with 68 components from 30 distinct parts.
Its main chip is the ESP32-S3-WROOM-1-N8R8, from the ESP32 family. Other key parts include the TP4056-42-ESOP8, AO3401A, AP2112K-3.3TRG1 and MPU-6050. By type, the board carries 24 resistors, 16 capacitors, 6 connectors, 5 ICs, 5 diodes and 4 transformers.
It belongs with the robotics & motion and power & battery designs in this gallery.
From the project
This directory contains the complete electronic design files, manufacturing rules, test suites, and component specifications for the CopperPilot 2-layer micro quadcopter flight controller and airframe.
This directory contains the complete electronic design files, manufacturing rules, test suites, and component specifications for the CopperPilot 2-layer micro quadcopter flight controller and airframe.
The board has been engineered from the ground up to match JLCPCB Standard 2-Layer PCB & SMT Assembly processes with high yield and zero manufacturing fee penalties.
Main components on the CopperPilotDrone
CopperPilotDrone bill of materials (BOM)
68 components, 30 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TP4056-42-ESOP8 TP4056 | SOIC127P600X175-9N | IC1 |
| 1 | AO3401A AO3401 | SOT-23 | U2 |
| 1 | AP2112K-3.3TRG1 Diodes Incorporated | SOT-23-5 | U3 |
| 1 | ESP32-S3-WROOM-1-N8R8 | ESP32-S3-WROOM-1 | U8 |
| 1 | MPU-6050 | MPU6050 | U9 |
| 1 | TYPE-C-31-M-12 USB_C_Receptacle_USB2.0 | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 4 | SM02B-GHS-TB(LF)(SN) Conn_01x02_Female | JST_GH_SM02B-GHS-TB_1x02-1MP_P1.25mm_Horizontal | J2, J4, J5, J6 |
| 1 | B2B-PH-SM4-TB(LF)(SN) | CONN-SMD_B2B-PH-SM4-TB-LF-SN | J3 |
| 1 | USBLC6-2SC6 | SOT-23-6 | ESD1 |
| 1 | 0603WAF3301T5E 3.3k | R_0603_1608Metric | Rprog1 |
| 1 | PCM12SMTR | slide switch spdt | SW1 |
| 2 | TS-1187A-C-C-B TS-1187A | SW_Push_1P1T_XKB_TS-1187A | SW2, SW3 |
| 4 | SI2302DS-T1 | SOT95P237X112-3N | T1, T2, T3, T4 |
| 1 | KT-0603B POW_LED | LED_0603_1608Metric | LED1 |
| 1 | 19-217/GHC-YR1S2/3T CHG | LED_0603_1608Metric | LED2 |
| 1 | KT-0603YG STDBY | LED_0603_1608Metric | LED3 |
| 1 | SS34 | D_SMA | D1 |
| 4 | 1N5819WS | D_SOD-323 | D2, D3, D4, D5 |
| 7 | CL10A106MP8NNNC 10uF | C_0603_1608Metric | C1, C3, C4, C5, C7, C9, C14 |
| 2 | CL10B104KB8NNNC 0.1uf | C_0603_1608Metric | C6, C12 |
Show 10 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | CL10B105KO8NNNC 1uf | C_0603_1608Metric | C10, C11 |
| 1 | CC0603KRX7R9BB222 2.2nF | C_0603_1608Metric | C13 |
| 4 | CC0603KRX7R9BB223 22nF | C_0603_1608Metric | C15, C16, C17, C18 |
| 1 | 0603WAF4700T5E 470R | R_0603_1608Metric | R1 |
| 4 | 0603WAF1003T5E 100k | R_0603_1608Metric | R2, R26, R27, R28 |
| 2 | 0603WAF1201T5E 1.2k | R_0603_1608Metric | R3, R4 |
| 6 | 0603WAF1002T5E 10k | R_0603_1608Metric | R10, R11, R18, R19, R20, R21 |
| 3 | 0603WAF4701T5E 4.7k | R_0603_1608Metric | R12, R13, R14 |
| 6 | 0603WAF220JT5E 22R | R_0603_1608Metric | R22, R23, R29, R30, R31, R32 |
| 2 | 0603WAF5101T5E 5.1k | R_0603_1608Metric | R24, R25 |
CopperPilotDrone design files
The KiCad project lives in the CopperPilot/CopperPilotDronePCB repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/CopperPilotDrone.kicad_pcb
- Schematicpcb/CopperPilotDrone.kicad_sch
CopperPilotDrone: common questions
What microcontroller does the CopperPilotDrone use?
The CopperPilotDrone is built around the ESP32-S3-WROOM-1-N8R8, from the ESP32 family.
How big is the CopperPilotDrone PCB?
The CopperPilotDrone measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the CopperPilotDrone?
68 components, from 30 distinct parts. The full bill of materials is listed on this page.
Where can I download the CopperPilotDrone design files?
From the CopperPilot/CopperPilotDronePCB repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the CopperPilotDrone design in my own project?
Yes, under the terms of its CERN-OHL-P-2.0 license, which CopperPilot chose for the repository.
Can I test firmware for the CopperPilotDrone without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k