Esp32-s3-fh-4r2-devboard

CopperPilot·esp32-s3-fh-4r2-devboard

Esp32-s3-fh-4r2-devboard PCB layout, top view — open source ESP32 board by CopperPilot

About the Esp32-s3-fh-4r2-devboard PCB

Esp32-s3-fh-4r2-devboard is an open source ESP32 PCB design by CopperPilot, published on GitHub. It is a 4-layer board measuring 27 × 56.2 mm, with 47 components from 28 distinct parts.

Its main chip is the ESP32-S3FH4R2, from the ESP32 family. Other key parts include the AP2112K-3.3TRG1 and USBLC6-2SC6. By type, the board carries 23 capacitors, 8 resistors, 3 ICs, 3 connectors, 3 diodes and 3 inductors.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

A compact, 4-layer, breadboard-friendly (27.00 × 56.20 mm, 0.9" / 22.86 mm row spacing) development board engineered around the Espressif ESP32-S3FH4R2 SoC (QFN-56 7×7 mm, 4 MB in-package Quad SPI Flash + 2 MB in-package Quad SPI PSRAM) for running embedded LLM inference workload

A compact, 4-layer, breadboard-friendly (27.00 × 56.20 mm, 0.9" / 22.86 mm row spacing) development board engineered around the Espressif ESP32-S3FH4R2 SoC (QFN-56 7×7 mm, 4 MB in-package Quad SPI Flash + 2 MB in-package Quad SPI PSRAM) for running embedded LLM inference workloads such as llama2.c (260K-parameter model) at 240 MHz.

All 36 remaining usable GPIOs (plus EN, +3V3, +5V, and GND) are broken out to J2 (Left) and J3 (Right) with explicit silkscreen labels:

Esp32-s3-fh-4r2-devboard, from the project README
From the project README

Main components on the Esp32-s3-fh-4r2-devboard

Esp32-s3-fh-4r2-devboard bill of materials (BOM)

47 components, 28 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-S3FH4R2
Espressif Systems
U1
1
AP2112K-3.3TRG1
AP2112K-3.3
Diodes Incorporated
U2
1
USBLC6-2SC6
STMicroelectronics
U3
1
TSX-3225 40.0000MF15Y-K0
40MHz
Seiko Epson
Y1
1
USB4105-GF-A
USB_C_Receptacle_USB2.0_16P
Global Connector Technology
J1
1
M20-9992046
HEADER_LEFT_1x20
Harwin
J2
1
M20-9992046
HEADER_RIGHT_1x20
Harwin
J3
1
ANT3216LL00R2400A
Yageo / Pulse
ANT1
1
B3U-1000P
RESET
Omron Electronics
SW1
1
B3U-1000P
BOOT
Omron Electronics
SW2
1
1N5819HW-7-F
B5819W
Diodes Incorporated
D1
1
LTST-C190KRKT
Red
Lite-On
D2
1
LTST-C190KGKT
Green
Lite-On
D3
1
LQG15HS2N0S02D
2.0nH
Murata
L1
1
LQG15HS2N7S02D
2.7nH
Murata
L2
1
LQW15AN24NJ00D
24nH
Murata
L3
2
CC0402JRNPO9BN150
15pF
Yageo
C1, C2
2
CL05A106MQ5NUNC
10uF
Samsung Electro-Mechanics
C3, C12
5
CL05A105KP5NNNC
1uF
Samsung Electro-Mechanics
C4, C8, C10, C13, C18
9
CL05B104KO5NNNC
100nF
Samsung Electro-Mechanics
C5, C6, C7, C9, C11, C14, C19, C21 +1
Show 8 more
QtyPartRefs
1
CL05B103KB5NNNC
10nF
Samsung Electro-Mechanics
C15
2
CC0402CRNPO9BN1R5
1.5pF
Yageo
C16, C17
1
CL10A106MP8NNNC
10uF
Samsung Electro-Mechanics
C20
1
CL10A226MP8NUNE
22uF
Samsung Electro-Mechanics
C22
2
RC0402FR-075K1L
5.1k
Yageo
R1, R2
2
RC0402FR-0710KL
10k
Yageo
R3, R4
2
RC0402FR-0722RL
22
Yageo
R5, R6
2
RC0402FR-071KL
1k
Yageo
R7, R8

Esp32-s3-fh-4r2-devboard design files

The KiCad project lives in the CopperPilot/esp32-s3-fh-4r2-devboard repository on GitHub; these links point at the commit this page was built from.

Esp32-s3-fh-4r2-devboard: common questions

What microcontroller does the Esp32-s3-fh-4r2-devboard use?

The Esp32-s3-fh-4r2-devboard is built around the ESP32-S3FH4R2, from the ESP32 family.

How big is the Esp32-s3-fh-4r2-devboard PCB?

The Esp32-s3-fh-4r2-devboard measures 27 × 56.2 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Esp32-s3-fh-4r2-devboard?

47 components, from 28 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Esp32-s3-fh-4r2-devboard design files?

From the CopperPilot/esp32-s3-fh-4r2-devboard repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Esp32-s3-fh-4r2-devboard design in my own project?

The repository has no license, so all rights stay with CopperPilot. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Esp32-s3-fh-4r2-devboard without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards