15 open source boards using the ESP32-S3FH4R2

Real designs built with the ESP32-S3FH4R2, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

15 boardsClear filters|Most starred

How designs wire the ESP32-S3FH4R2

Read from the KiCad layouts of 13 open source designs, one per repository: what each pin of the ESP32-S3FH4R2 connects to, and the resistors, capacitors and other passives placed on it.

  • The LNA_IN/RF pin has a capacitor to GND on 10 of 13 designs, most often 3.3 pF (then 100 nF).
  • The LNA_IN/RF pin has a inductor on 10 of 13 designs, most often 2.7 nH (then 2.4 nH).
  • The CHIP_PU/RESET pin has a capacitor to GND on 10 of 13 designs, most often 100 nF (then 1 µF).
  • The CHIP_PU/RESET pin has a pull-up to 3.3V on 10 of 13 designs, most often 10 kΩ (then 2.2 kΩ).
LNA_IN/RFpin 1Connected to: Signal 85%
  • Capacitor to GND on 77% · 3.3 pF (2), 100 nF (1), 2.2 µF (1)
  • Inductor on 77% · 2.7 nH (3), 2.4 nH (2), 2.2 nH (2)
VDD3P3pin 2, 3Connected to: VDD3P3 69% · not connected 15% · a signal 15%
  • Decoupling capacitor on 69% · 100 nF (14), 1 µF (4), 22 µF (2)
  • Inductor on 54% · 2 nH (6), 2.2 nH (4), 2.7 nH (4)
CHIP_PU/RESETpin 4Connected to: A connector 23%
  • Capacitor to GND on 77% · 100 nF (7), 1 µF (5), 2.2 µF (1)
  • Pull-up to 3.3V on 77% · 10 kΩ (9), 2.2 kΩ (1)
GPIO0/BOOTpin 5Connected to: Signal 85%
  • Pull-up to 3.3V on 31% · 10 kΩ (4)
VDD3P3_RTCpin 20Connected to: 3.3V 92%
  • Decoupling capacitor on 83% · 100 nF (12), 4.7 µF (1)
SPI_CS1/GPIO26pin 28Connected to: Not connected 100%
VDD_SPIpin 29Connected to: VDD_SPI 50% · not connected 42%
  • Decoupling capacitor on 50% · 100 nF (6), 1 µF (4), 10 µF (1)
SPIHD/GPIO27pin 30Connected to: Not connected 100%
SPIWP/GPIO28pin 31Connected to: Not connected 100%
SPICS0/GPIO29pin 32Connected to: Not connected 100%
SPICLK/GPIO30pin 33Connected to: Not connected 100%
SPIQ/GPIO31pin 34Connected to: Not connected 100%
SPID/GPIO32pin 35Connected to: Not connected 100%
VDD3P3_CPUpin 46Connected to: 3.3V 92%
  • Decoupling capacitor on 75% · 100 nF (9), 1 µF (3), 10 nF (2)
U0TXD/PROG/GPIO43pin 49Connected to: A connector 33% · not connected 42%
  • Series resistor on 33% · 499 Ω (1), 220 Ω (1), 470 Ω (1)
XTAL_Npin 53Connected to: Signal 83% · not connected 17%
  • Crystal on 83% · 40 MHz (8), 48 MHz (1)
  • Capacitor to GND on 83% · 12 pF (4), 15 pF (3), 27 pF (1)
XTAL_Ppin 54Connected to: Signal 83% · not connected 17%
  • Capacitor to GND on 42% · 15 pF (2), 12 pF (1), 3.9 pF (1)
  • Crystal on 42% · 40 MHz (4)
VDDApin 55, 56Connected to: 3.3V 92%
  • Decoupling capacitor on 75% · 100 nF (22), 1 µF (15), 10 µF (6)
  • Inductor on 33% · 2 nH (4), 2.2 nH (2), 2.7 nH (1)
GNDpin 57Connected to: GND 92%

36 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Mdb bridge esp32s3 by nodestark, Zerowriter Inkplate 5 Gen2 by zerowriter, Dspod esp32s3 by emeb and Geekble nano-ESP32S3 by SooDragon.

The ESP32-S3FH4R2 in open source designs

The gallery holds 15 open source boards using the ESP32-S3FH4R2 from 12 GitHub repositories; a typical one measures about 42 × 40 mm and carries around 60 components.

67% use four copper layers or more, and 47% carry an open source license.

The most starred is Mdb slave esp32s3-sim7080g by nodestark.

Parts used alongside the ESP32-S3FH4R2

Microcontrollers on boards using the ESP32-S3FH4R2

ESP32-S3FH4R2: common questions

Where can I find a ESP32-S3FH4R2 reference design?

Each of the 15 boards on this page is a real design using the ESP32-S3FH4R2. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the ESP32-S3FH4R2 LNA_IN/RF pin connected?

The LNA_IN/RF pin has a capacitor to GND on 10 of 13 designs, most often 3.3 pF (then 100 nF). Counted from the KiCad layouts of 13 open source designs using the ESP32-S3FH4R2.

How is the ESP32-S3FH4R2 CHIP_PU/RESET pin connected?

The CHIP_PU/RESET pin has a capacitor to GND on 10 of 13 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 13 open source designs using the ESP32-S3FH4R2.

What decoupling capacitors do designs use on the ESP32-S3FH4R2 VDD3P3_RTC pin?

The VDD3P3_RTC pin has a decoupling capacitor on 10 of 12 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 13 open source designs using the ESP32-S3FH4R2.

What parts are used alongside the ESP32-S3FH4R2?

The AP2112K-3.3, AP2112K-3.3TRG1 and USBLC6-2SC6 appear in the most repositories here.

Which microcontrollers do boards using the ESP32-S3FH4R2 use?

Most are built on ESP32 (15).

How big is a typical board using the ESP32-S3FH4R2?

The median is 42 × 40 mm, and 33% are two-layer designs.

What is the most popular open source board using the ESP32-S3FH4R2?

By GitHub stars, Mdb slave esp32s3-sim7080g by nodestark, with 173 stars.

Can I simulate one of these boards using the ESP32-S3FH4R2 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part