Haargabeldings
cpresser·haargabeldings
About the Haargabeldings PCB
Haargabeldings is an open source Microchip SAM PCB design by cpresser, published on GitHub. It is a 2-layer board measuring 159 × 36 mm, with 102 components from 26 distinct parts.
Its main chip is the ATSAMD21G18A-M, from the Microchip SAM family. Other key parts include the MCP73831-2-OT, TPS22929D, TPS79330-EP, MPU-6050 and AT25SF081-SSHD-X. By type, the board carries 47 capacitors, 32 diodes, 10 resistors, 6 ICs, 3 connectors and 2 switches.
It belongs with the power & battery designs in this gallery.
From the project
A Hair-Thingy with LEDs
Since there was no space left to route tracks or put parts, no other Pins are broken out. Also there is no USB ESD Protection.
All parts are available at digikey though - assuming there is no global semiconductor supplychain crisis.

Main components on the Haargabeldings
Haargabeldings bill of materials (BOM)
102 components, 26 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP73831-2-OT | SOT-23-5 | U1 |
| 1 | ATSAMD21G18A-M | QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm | U2 |
| 1 | TPS22929D | SOT-23-6 | U3 |
| 1 | TPS79330-EP | SOT-23-5 | U4 |
| 1 | MPU-6050 | InvenSense_QFN-24_4x4mm_P0.5mm | U5 |
| 1 | AT25SF081-SSHD-X | SOIC-8_3.9x4.9mm_P1.27mm | U6 |
| 1 | 32kHz | Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | USB_B_Micro | USB_Micro-B_Amphenol_10103594-0001LF_Horizontal | J1 |
| 1 | Picoblade_01x03 | Molex_PicoBlade_53261-0371_1x03-1MP_P1.25mm_Horizontal | J2 |
| 1 | SWD | Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical | J3 |
| 2 | SKRKAEE020 | SW_Push_SPST_NO_Alps_SKRK | SW1, SW2 |
| 1 | blue | LED_0603_1608Metric | D1 |
| 1 | BZT52C2V7T-7 | D_SOD-523 | D2 |
| 30 | APA102-2020 | LED-APA102-2020 | D3, D4, D5, D6, D7, D8, D9, D10 +22 |
| 1 | BLM18 | R_0603_1608Metric | L1 |
| 37 | 100n | C_0603_1608Metric | C1, C4, C5, C7, C10, C15, C16, C17 +29 |
| 1 | 1u | C_0603_1608Metric | C2 |
| 5 | 4u7 | C_0805_2012Metric | C3, C11, C12, C13, C14 |
| 2 | 12p | C_0603_1608Metric | C6, C8 |
| 1 | 10n | C_0603_1608Metric | C9 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 2n2 | C_0603_1608Metric | C20 |
| 2 | 100k | R_0603_1608Metric | R1, R2 |
| 1 | 4.7k | R_0603_1608Metric | R3 |
| 3 | 270R | R_0603_1608Metric | R4, R5, R7 |
| 1 | 1k | R_0603_1608Metric | R6 |
| 3 | 10k | R_0603_1608Metric | R8, R9, R10 |
Haargabeldings design files
The KiCad project lives in the cpresser/haargabeldings repository on GitHub; these links point at the commit this page was built from.
- Layouthaargabel.kicad_pcb
- Schematichaargabel.kicad_sch
Haargabeldings: common questions
What microcontroller does the Haargabeldings use?
The Haargabeldings is built around the ATSAMD21G18A-M, from the Microchip SAM family.
How big is the Haargabeldings PCB?
The Haargabeldings measures 159 × 36 mm, has 2 copper layers and is 0.57 mm thick.
How many components are on the Haargabeldings?
102 components, from 26 distinct parts. The full bill of materials is listed on this page.
Where can I download the Haargabeldings design files?
From the cpresser/haargabeldings repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Haargabeldings design in my own project?
The repository has no license, so all rights stay with cpresser. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Haargabeldings without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Microchip SAM firmware against it before you order a PCB.
Similar boards
Microchip SAM
Microcontroller Expansion Card
FrameworkComputer
26 × 30 mm24 parts2LCC-BY-4.01.1kMicrochip SAM
Taco Raven
VoronDesign
120 × 113 mm349 parts4LGPL-3.01.1kMicrochip SAM
Fpgaboy
Wren6991
50 × 50 mm89 parts4LNo license511Microchip SAM
ModulAdapter universal
GaudiLabs
100 × 69.5 mm45 parts2LGPL-3.0487Microchip SAM
OpenDropV4
GaudiLabs
124 × 115.4 mm118 parts2LGPL-3.0487Microchip SAM
Kira
kiibohd
366.9 × 114.3 mm400 partsCERN-OHL-1.2416