Antcontroller
cr1tbit·antcontroller
About the Antcontroller PCB
Antcontroller is an open source ESP32 PCB design by cr1tbit, published on GitHub. It is a 2-layer board measuring 230 × 160 mm, with 369 components from 45 distinct parts.
Its main chip is the ESP32-WROOM-32U, from the ESP32 family. Other key parts include the PCA9306DC, AZ1117-3.3, LM317_TO-220, PCA9555PW and 74HC244. By type, the board carries 145 resistors, 58 diodes, 57 capacitors, 33 transistors, 18 ICs and 16 fuses.
Main components on the Antcontroller
Antcontroller bill of materials (BOM)
369 components, 45 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PCA9306DC | VSSOP-8_2.3x2mm_P0.5mm | U1 |
| 1 | ESP32-WROOM-32U | ESP32-WROOM-32U | U2 |
| 1 | AZ1117-3.3 | SOT-223-3_TabPin2 | U3 |
| 1 | LM317_TO-220 | TO-220-3_Vertical | U4 |
| 3 | PCA9555PW | TSSOP-24_4.4x7.8mm_P0.65mm | U5, U6, U9 |
| 3 | 74HC244 | TSSOP-20_4.4x6.5mm_P0.65mm | U7, U8, U10 |
| 8 | LTV-356T | SO-4_4.4x3.6mm_P2.54mm | U11, U12, U13, U14, U15, U16, U17, U18 |
| 17 | MMBT3904 | SOT-23 | Q1, Q2, Q19, Q20, Q21, Q22, Q23, Q24 +9 |
| 16 | BUZ11 | TO-220-3_Vertical | Q3, Q4, Q5, Q6, Q7, Q8, Q9, Q10 +8 |
| 2 | Lichtenprog_conn | Lichtenprog_board | J1, J7 |
| 4 | IDC10 | IDC-Header_2x05_P2.54mm_Vertical | J2, J6, J8, J9 |
| 4 | VIN | DG235-5.0 | J3, J15, J16, J17 |
| 1 | FRONT_PANEL | PinHeader_2x08_P2.54mm_Horizontal | J4 |
| 1 | SMA CONN | SMA_Amphenol_901-143_Horizontal | J5 |
| 1 | Proto_matrix_14x10 | Proto_matrix_14x10 | J14 |
| 16 | FUSE_1206 | Fuse_1206_3216Metric | F1, F2, F3, F4, F5, F6, F7, F8 +8 |
| 1 | 5V_PROG | SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1 |
| 1 | 3V3_SEL | SolderJumper-3_P2.0mm_Open_TrianglePad1.0x1.5mm | JP2 |
| 1 | 5V_SEL | SolderJumper-3_P2.0mm_Open_TrianglePad1.0x1.5mm | JP3 |
| 2 | GND_CONN | SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP4, JP6 |
Show 25 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | IOEX_A2_SEL | SolderJumper-3_P2.0mm_Open_TrianglePad1.0x1.5mm | JP5, JP8 |
| 1 | 5V_CONN | SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP7 |
| 15 | G5V-1 | Relay_SPDT_Omron_G5V-1 | K1, K2, K3, K4, K5, K6, K7, K8 +7 |
| 1 | B_RST | SW_SPST_TL3342 | SW1 |
| 1 | B1/BOOT | SW_SPST_TL3342 | SW2 |
| 1 | B2 | SW_SPST_TL3342 | SW3 |
| 2 | B3 | SW_SPST_TL3342 | SW4, SW5 |
| 1 | SMA PADS | TestPoint_2Pads_Pitch2.54mm_Drill0.8mm | TP1 |
| 43 | LED_RED | LED_0603_1608Metric | D1, D2, D3, D4, D5, D6, D7, D8 +35 |
| 15 | 1N4148WS | D_SOD-323 | D44, D45, D46, D47, D48, D49, D50, D51 +7 |
| 3 | 10U 10u | C_0603_1608Metric | C1, C9, C10 |
| 16 | 100N 100n | C_0402_1005Metric | C2, C3, C4, C8, C11, C13, C14, C15 +8 |
| 4 | 1n | C_0402_1005Metric | C5, C12, C17, C35 |
| 4 | 1N/DNP 1n/DNP | C_0402_1005Metric | C6, C7, C54, C55 |
| 28 | 10N 10n | C_0402_1005Metric | C22, C23, C24, C25, C26, C27, C28, C29 +20 |
| 2 | 220u | CP_Radial_D8.0mm_P3.50mm | C56, C57 |
| 44 | 10K 10k | R_0402_1005Metric | R1, R3, R4, R5, R6, R11, R12, R19 +36 |
| 1 | 200K 200k | R_0402_1005Metric | R2 |
| 43 | 4K7 4k7 | R_0402_1005Metric | R7, R8, R9, R10, R37, R38, R40, R42 +35 |
| 40 | 33K 33k | R_0402_1005Metric | R13, R107, R108, R109, R110, R111, R112, R113 +32 |
| 2 | 15K 15k | R_0402_1005Metric | R14, R15 |
| 1 | 240 | R_0402_1005Metric | R16 |
| 1 | 720 | R_0402_1005Metric | R17 |
| 1 | 100K 100k | R_0402_1005Metric | R18 |
| 12 | 10K_1206 10k_1206 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R21, R22, R23, R24, R25, R26, R27, R29 +4 |
Antcontroller design files
The KiCad project lives in the cr1tbit/antcontroller repository on GitHub; these links point at the commit this page was built from.
Antcontroller: common questions
What microcontroller does the Antcontroller use?
The Antcontroller is built around the ESP32-WROOM-32U, from the ESP32 family.
How big is the Antcontroller PCB?
The Antcontroller measures 230 × 160 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Antcontroller?
369 components, from 45 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Antcontroller design files?
From the cr1tbit/antcontroller repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Antcontroller design in my own project?
The repository has no license, so all rights stay with cr1tbit. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Antcontroller without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k