39 open source boards using the ESP32-WROOM-32U
Real designs built with the ESP32-WROOM-32U, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
FreeDSP-aurora
freeDSP
110 × 110 mm502 parts2LCC-BY-SA-4.0222ESP32
Meshtastic DIY 1W board
Hydra-Designs
28 × 46.2 mm43 parts2LGPL-3.0166ESP32
Tobor
evezor
263.5 × 63.5 mm122 parts2LCERN-OHL-P-2.0126ESP32
Esp32InductanceMeterV2
RobieElliz
94 × 99 mm79 parts2LMIT20ESP32
Hw sensor
larus-breeze
120 × 74.6 mm215 parts4LCustom license14ESP32
ISEMS-ESP32
ISEMS
96.3 × 93.6 mm67 parts2LNo license11ESP32
Hcv
chrkir
49.5 × 40.5 mm31 parts2LNo license5ESP32
Sigfox chicken coop
Jeija
50 × 53 mm99 parts4LNo license3ESP32
ESP32 UniversalRemote
qvinhdao
130 × 130 mm53 parts2LNo license3RP2040/RP2350
Midi controller
Tommie1236
100 × 100 mm515 parts4LCERN-OHL-W-2.02ESP32
Pilot 6 axis
X-Lemon-X
171 × 83.9 mm125 parts2LMIT2ESP32
RoboticArm
SensaGroup
163.4 × 100.6 mm95 parts2LMIT2ESP32
FreeDSP-aurora
mischuja
110 × 110 mm502 parts2LGPL-3.01ESP32
Antcontroller
cr1tbit
230 × 160 mm369 parts2LNo license1ESP32
Ublink
koraa
67 × 54.5 mm55 parts2LNo license1ESP32
TrailCurrentBearing
trailcurrentoss
48.4 × 44.1 mm15 parts2LMIT1ESP32
Joker60 mkII
ZeshuLiu
323.5 × 102.5 mm193 parts2LMIT0ESP32
Sprinkler-System
Swamp-Ig
165 × 85 mm73 parts2LNo license0ESP32
Mainboard
pumpingstationone
89.6 × 90 mm72 parts4LMIT0ESP32
Esp32
Hackuarium
85 × 75 mm58 parts2LNo license0ESP32
Esp23 i3 heat thermostat
i3detroit
111 × 65 mm54 parts2LNo license0ESP32
Desk control
mubarizahmed
54 × 100.5 mm34 parts2LNo license0ESP32
SIH Smart Irrigation System
Arshsingh1602
38 × 90 mm30 parts2LMIT0ESP32
Iot-Data-Acquisiton-Board
IEEE-VIT
69 × 30.9 mm19 parts2LMIT0- schematic only · 23 partsESP32
Drone-Controller
Hardy2008
23 partsNo license0 ESP32
Zerowriter Keyboard
zerowriter
271.2 × 93.4 mm136 parts2LGPL-3.046ESP32
RC14
AgOpenGPS-Official
145 × 108 mm88 parts2LGPL-3.020ESP32
Reader
bullestock
58 × 32 mm34 parts2LGPL-3.02ESP32
BaseChipOnly
ZonatedCord
39.1 × 68.9 mm21 parts2LCC-BY-NC-4.01ESP32
Adau1492
fabguitar69690
113 × 77 mm171 parts2LNo license0ESP32
VCU
matatma23-gento
60.5 × 100.5 mm160 parts4LNo license0ESP32
Joker60 HUB
ZeshuLiu
99 × 25 mm24 parts2LMIT0ESP32
RaspberryPiHat
HoldenHalucha
54.3 × 29.3 mm16 parts2LNo license0ESP32
Oven2
bybzmt
75 × 160 mm47 parts2LNo license0ESP32
Display
bullestock
43.9 × 44.5 mm17 parts2LGPL-3.02ESP32
SPD PowerMonitor
LedgerProject
47.5 × 37 mm31 parts4LMIT0
How designs wire the ESP32-WROOM-32U
Read from the KiCad layouts of 34 open source designs, one per repository: what each pin of the ESP32-WROOM-32U connects to, and the resistors, capacitors and other passives placed on it.
- The SCS/CMD pin is left unconnected on 33 of 34 designs.
- The EN pin has a pull-up to 3.3V on 27 of 34 designs, most often 10 kΩ (then 1 kΩ).
- The SHD/SD2 pin is left unconnected on 32 of 34 designs (a signal on 2).
- The SWP/SD3 pin is left unconnected on 32 of 34 designs (a signal on 2).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1, 15, 38, 39 | Connected to: GND 99% | — |
| VDDpin 2 | Connected to: 3.3V 82% · a signal 18% |
|
| ENpin 3 | Connected to: A connector 35% |
|
| SENSOR_VPpin 4 | Connected to: Not connected 74% · a signal 26% | — |
| SENSOR_VNpin 5 | Connected to: Not connected 79% · a signal 21% | — |
| IO35pin 7 | Connected to: Not connected 62% · a signal 35% | — |
| IO12pin 14 | Connected to: Not connected 62% · a signal 38% | — |
| SHD/SD2pin 17 | Connected to: Not connected 94% | — |
| SWP/SD3pin 18 | Connected to: Not connected 94% | — |
| SCS/CMDpin 19 | Connected to: Not connected 97% | — |
| SCK/CLKpin 20 | Connected to: Not connected 94% | — |
| SDO/SD0pin 21 | Connected to: Not connected 94% | — |
| SDI/SD1pin 22 | Connected to: Not connected 91% | — |
| NCpin 32 | Connected to: Not connected 100% | — |
22 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include FreeDSP-aurora by freeDSP, Meshtastic DIY 1W board by Hydra-Designs, Tobor by evezor and RC14 by AgOpenGPS-Official.
The ESP32-WROOM-32U in open source designs
The gallery holds 39 open source boards using the ESP32-WROOM-32U from 37 GitHub repositories; a typical one measures about 93.8 × 84.5 mm and carries around 72 components.
82% are two-layer designs, the rest use four layers or more, and 51% carry an open source license.
The most starred is FreeDSP-aurora by freeDSP.
Parts used alongside the ESP32-WROOM-32U
Microcontrollers on boards using the ESP32-WROOM-32U
What boards using the ESP32-WROOM-32U are built for
ESP32-WROOM-32U: common questions
Where can I find a ESP32-WROOM-32U reference design?
Each of the 39 boards on this page is a real design using the ESP32-WROOM-32U. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the ESP32-WROOM-32U SCS/CMD pin connected?
The SCS/CMD pin is left unconnected on 33 of 34 designs. Counted from the KiCad layouts of 34 open source designs using the ESP32-WROOM-32U.
What pull-up resistor is used on the ESP32-WROOM-32U EN pin?
The EN pin has a pull-up to 3.3V on 27 of 34 designs, most often 10 kΩ (then 1 kΩ). Counted from the KiCad layouts of 34 open source designs using the ESP32-WROOM-32U.
How is the ESP32-WROOM-32U SHD/SD2 pin connected?
The SHD/SD2 pin is left unconnected on 32 of 34 designs (a signal on 2). Counted from the KiCad layouts of 34 open source designs using the ESP32-WROOM-32U.
What parts are used alongside the ESP32-WROOM-32U?
The AMS1117-3.3, CH340C, 25AA1024T-I/SM, ADAU1452WBCPZ and ADM811TARTZ-REEL appear in the most repositories here.
Which microcontrollers do boards using the ESP32-WROOM-32U use?
Most are built on ESP32 (37) and RP2040/RP2350 (2).
How big is a typical board using the ESP32-WROOM-32U?
The median is 93.8 × 84.5 mm, and 82% are two-layer designs.
What is the most popular open source board using the ESP32-WROOM-32U?
By GitHub stars, FreeDSP-aurora by freeDSP, with 222 stars.
Can I simulate one of these boards using the ESP32-WROOM-32U before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.