23 open source boards using the PCA9555PW
Real designs built with the PCA9555PW, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
Phase
mjpauly
128 × 92.6 mm66 parts2LNo license15MC5000 DevKit
RickP
100 × 97.5 mm77 parts2LGPL-3.06ESP32
Okeeb
OklahomaOpenSourceHardware
306.5 × 96.9 mm198 parts2LGPL-3.02Raspberry Pi
Mothbox 5.0.4
Digital-Naturalism-Laboratories
237 × 139 mm159 parts2LMIT2ESP32
Antcontroller
cr1tbit
230 × 160 mm369 parts2LNo license1ESP32
ESP32 LORA Chat
jharvey
121.9 × 101.6 mm222 parts4LGPL-3.01The Interchange Keyboard - Right Module
headblockhead
175.6 × 104 mm124 parts2LCERN-OHL-S-2.01AVR/Arduino
Central control
adarwoo
103 × 107 mm147 parts4LNo license0AVR/Arduino
Mss cascade adv
IowaScaledEngineering
127 × 76.2 mm134 parts2LNo license0ESP32
Gps seven seg clock
JWehle
101.6 × 101.6 mm95 parts4LApache-2.00ESP32
Orc
aramder
95 × 82 mm81 parts2LCustom license0Buttons2 waveshare eth esp32s3
FlamingLotusGirls
56 × 92 mm52 parts2LMIT0Pando - Right
jyap808
144.1 × 121.5 mm70 parts2LCERN-OHL-S-2.010Raspberry Pi
Mothbox 5.0.6
Digital-Naturalism-Laboratories
237 × 139.1 mm159 parts2LMIT2Slab Keyboard - Left Module
headblockhead
158 × 104 mm113 parts2LCERN-OHL-S-2.01Mss cascade basic testjig
IowaScaledEngineering
101.6 × 120.7 mm97 parts2LNo license0Haven buttons2.kicad pro
FlamingLotusGirls
56 × 92 mm52 parts2LMIT0Slab Keyboard - Hackpad Module
headblockhead
125.2 × 95 mm101 parts2LCERN-OHL-S-2.01Haven buttons1
FlamingLotusGirls
56 × 92 mm50 parts2LMIT0Raspberry Pi
Zoxnoxious Backplane and VCA
brer-rabbit
133.8 × 102.9 mm86 parts4LGPL-3.068SensactInpExt2
klaus-liebler
90 × 66 mm139 parts2LApache-2.04AVR/Arduino
Console left
adarwoo
55 × 84.5 mm55 parts2LNo license0Console right
adarwoo
69.3 × 87 mm40 parts2LNo license0
How designs wire the PCA9555PW
Read from the KiCad layouts of 15 open source designs, one per repository: what each pin of the PCA9555PW connects to, and the resistors, capacitors and other passives placed on it.
- The SCL pin has a pull-up to 5V on 12 of 15 designs, most often 4.7 kΩ (then 2.2 kΩ).
- The SDA pin has a pull-up to 5V on 12 of 15 designs, most often 4.7 kΩ (then 2.2 kΩ).
- The VDD pin has a decoupling capacitor on 11 of 15 designs, most often 100 nF.
- The A1 pin is tied to GND on 11 of 15 designs (5V on 2).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| INTpin 1 | Connected to: Not connected 60% · a signal 40% | — |
| A1pin 2 | Connected to: GND 73% | — |
| A2pin 3 | Connected to: GND 73% | — |
| IO0_4pin 8 | Connected to: Signal 87% |
|
| IO0_5pin 9 | Connected to: Signal 93% |
|
| IO0_6pin 10 | Connected to: Signal 87% |
|
| IO0_7pin 11 | Connected to: Signal 80% · not connected 20% |
|
| VSSpin 12 | Connected to: GND 100% | — |
| IO1_3pin 16 | Connected to: Signal 93% |
|
| A0pin 21 | Connected to: GND 67% · 5V 20% | — |
| SCLpin 22 | Connected to: A connector 47%, PCA9555PW 33%, the microcontroller 27% |
|
| SDApin 23 | Connected to: A connector 47%, PCA9555PW 33%, the microcontroller 27% |
|
| VDDpin 24 | Connected to: 3.3V 100% |
|
11 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Zoxnoxious Backplane and VCA by brer-rabbit, Phase by mjpauly, Pando - Right by jyap808 and MC5000 DevKit by RickP.
The PCA9555PW in open source designs
The gallery holds 23 open source boards using the PCA9555PW from 15 GitHub repositories; a typical one measures about 121.9 × 97.5 mm and carries around 97 components.
83% are two-layer designs, the rest use four layers or more, and 65% carry an open source license.
The most starred is Zoxnoxious Backplane and VCA by brer-rabbit.
Microcontrollers on boards using the PCA9555PW
What boards using the PCA9555PW are built for
PCA9555PW: common questions
Where can I find a PCA9555PW reference design?
Each of the 23 boards on this page is a real design using the PCA9555PW. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What pull-up resistor is used on the PCA9555PW SCL pin?
The SCL pin has a pull-up to 5V on 12 of 15 designs, most often 4.7 kΩ (then 2.2 kΩ). Counted from the KiCad layouts of 15 open source designs using the PCA9555PW.
What pull-up resistor is used on the PCA9555PW SDA pin?
The SDA pin has a pull-up to 5V on 12 of 15 designs, most often 4.7 kΩ (then 2.2 kΩ). Counted from the KiCad layouts of 15 open source designs using the PCA9555PW.
What decoupling capacitors do designs use on the PCA9555PW VDD pin?
The VDD pin has a decoupling capacitor on 11 of 15 designs, most often 100 nF. Counted from the KiCad layouts of 15 open source designs using the PCA9555PW.
Which microcontrollers do boards using the PCA9555PW use?
Most are built on ESP32 (5), AVR/Arduino (4) and Raspberry Pi (3).
How big is a typical board using the PCA9555PW?
The median is 121.9 × 97.5 mm, and 83% are two-layer designs.
What is the most popular open source board using the PCA9555PW?
By GitHub stars, Zoxnoxious Backplane and VCA by brer-rabbit, with 68 stars.
Can I simulate one of these boards using the PCA9555PW before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.