Slot esp32-s3-hardware

CrabikBoards·slot-esp32-s3-hardware

Slot esp32-s3-hardware PCB layout, top view — open source ESP32 board by CrabikBoards

About the Slot esp32-s3-hardware PCB

Slot esp32-s3-hardware is an open source ESP32 PCB design by CrabikBoards, published on GitHub under the CERN-OHL-W-2.0 license. It is a 2-layer board measuring 50.8 × 50.8 mm, with 47 components from 29 distinct parts.

Its main chip is the ESP32-S3-MINI-1, from the ESP32 family. Other key parts include the MCP73831T-2ACI, USBLC6-2SC6, MAX17048 and RT9080-33GJ5 or AP2112K-3.3. By type, the board carries 14 resistors, 11 connectors, 10 capacitors, 6 ICs, 4 diodes and 1 transistor.

From the project

Crabik Slot ESP32-S3 Hardware

Crabik Slot was created so that you can quickly prototype, research and educational projects, because it makes it easy to create and test without having to assemble everything on a breadboard and dig into a pile of wires.

Schematics and board designs (KiCad projects), distributed as open hardware and available under CERN-OHL-W v2 license.

Slot esp32-s3-hardware, from the project README
From the project README

Main components on the Slot esp32-s3-hardware

Slot esp32-s3-hardware bill of materials (BOM)

47 components, 29 distinct parts.

QtyPartRefs
1
MCP73831T-2ACI
U1
1
USBLC6-2SC6
U2
1
ESP32-S3-MINI-1
U3
1
MAX17048
U4
2
RT9080-33GJ5 or AP2112K-3.3
U5, U6
1
CJ2301
Q1
1
UP (A)
J1
1
DOWN (A)
J2
1
UP (B)
J4
1
DOWN (B)
J5
1
CENTER (C) (1)
J15
1
CENTER (D) (1)
J16
1
CENTER (C) (2)
J17
1
CENTER (D) (2)
J18
1
CENTER (C) (3)
J19
1
CENTER (D) (3)
J20
1
USB-C
P1
1
Reset button
SW1
1
MSK4005
D1
1
USER_LED
D2
Show 9 more
QtyPartRefs
1
CHRG_LED
D3
1
PWR_LED
D4
7
10 uF
C1, C3, C6, C9, C10, C11, C12
2
1 uF
C2, C5
1
100nF
C4
1
10k
R1
5
5.1 kOhm
R2, R4, R12, R13, R14
1
2 kOhm
R3
7
10 kOhm
R5, R6, R7, R8, R9, R10, R11

Slot esp32-s3-hardware design files

The KiCad project lives in the CrabikBoards/slot-esp32-s3-hardware repository on GitHub; these links point at the commit this page was built from.

Slot esp32-s3-hardware: common questions

What microcontroller does the Slot esp32-s3-hardware use?

The Slot esp32-s3-hardware is built around the ESP32-S3-MINI-1, from the ESP32 family.

How big is the Slot esp32-s3-hardware PCB?

The Slot esp32-s3-hardware measures 50.8 × 50.8 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Slot esp32-s3-hardware?

47 components, from 29 distinct parts. The full bill of materials is listed on this page.

Where can I download the Slot esp32-s3-hardware design files?

From the CrabikBoards/slot-esp32-s3-hardware repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Slot esp32-s3-hardware design in my own project?

Yes, under the terms of its CERN-OHL-W-2.0 license, which CrabikBoards chose for the repository.

Can I test firmware for the Slot esp32-s3-hardware without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards