69 open source boards using the MAX17048

Real designs built with the MAX17048, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

69 boardsClear filters|Most starred

How designs wire the MAX17048

Read from the KiCad layouts of 41 open source designs, one per repository: what each pin of the MAX17048 connects to, and the resistors, capacitors and other passives placed on it.

  • The VDD pin has a decoupling capacitor on 34 of 41 designs, most often 100 nF (then 4.7 µF).
  • The CTG pin is tied to GND on 34 of 41 designs (3.3V on 3, a signal on 3).
  • The SDA pin has a pull-up to 3.3V on 28 of 40 designs, most often 4.7 kΩ (then 10 kΩ).
  • The SCL pin has a pull-up to 3.3V on 27 of 40 designs, most often 4.7 kΩ (then 10 kΩ).
CTGpin 1Connected to: GND 83%
CELLpin 2Connected to: BATT 68% · a signal 29%
VDDpin 3Connected to: BATT 71% · a signal 27%
  • Decoupling capacitor on 83% · 100 nF (27), 4.7 µF (8), 1 µF (8)
GNDpin 4, 9Connected to: GND 83%
ALRTpin 5Connected to: The microcontroller 32% · not connected 34%
  • Pull-up to 3.3V on 32% · 10 kΩ (8), 5.1 kΩ (1), 150 kΩ (1)
QSTRTpin 6Connected to: GND 76% · a signal 17%
SCLpin 7Connected to: The microcontroller 60%, a connector 45%
  • Pull-up to 3.3V on 68% · 4.7 kΩ (8), 10 kΩ (8), 100 kΩ (2)
SDApin 8Connected to: The microcontroller 60%, a connector 48%
  • Pull-up to 3.3V on 70% · 4.7 kΩ (8), 10 kΩ (8), 100 kΩ (2)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Open Source Smart Glasses by Mentra-Community, Mikoto by zhiayang, Co2-canary by blinry and Gk by jncronin.

The MAX17048 in open source designs

The gallery holds 69 open source boards using the MAX17048 from 43 GitHub repositories; a typical one measures about 63.5 × 84 mm and carries around 80 components.

66% use four copper layers or more, and 52% carry an open source license.

The most starred is Open Source Smart Glasses by Mentra-Community.

Microcontrollers on boards using the MAX17048

MAX17048: common questions

Where can I find a MAX17048 reference design?

Each of the 69 boards on this page is a real design using the MAX17048. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the MAX17048 VDD pin?

The VDD pin has a decoupling capacitor on 34 of 41 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 41 open source designs using the MAX17048.

How is the MAX17048 CTG pin connected?

The CTG pin is tied to GND on 34 of 41 designs (3.3V on 3, a signal on 3). Counted from the KiCad layouts of 41 open source designs using the MAX17048.

What pull-up resistor is used on the MAX17048 SDA pin?

The SDA pin has a pull-up to 3.3V on 28 of 40 designs, most often 4.7 kΩ (then 10 kΩ). Counted from the KiCad layouts of 41 open source designs using the MAX17048.

What parts are used alongside the MAX17048?

The AP2112K-3.3, MCP73831, CH340C, DW01A and AP5054HTC appear in the most repositories here.

Which microcontrollers do boards using the MAX17048 use?

Most are built on ESP32 (33), Nordic nRF (10), RP2040/RP2350 (8) and STM32 (3).

How big is a typical board using the MAX17048?

The median is 63.5 × 84 mm, and 34% are two-layer designs.

What is the most popular open source board using the MAX17048?

By GitHub stars, Open Source Smart Glasses by Mentra-Community, with 1,235 stars.

Can I simulate one of these boards using the MAX17048 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part