Diego Checkmate
CRG-Glen·DIEGO-500·KICAD/Checkmate/Diego Checkmate.kicad_pcb
About the Diego Checkmate PCB
Diego Checkmate is an open source PCB design by CRG-Glen, published on GitHub under the CERN-OHL-S-2.0 license. It is a 4-layer board measuring 275 × 95 mm, with 126 components from 48 distinct parts.
Other key parts include the C90569, 74ALS245, 74LS245, 74LS32 and MAX16054AZT_T. By type, the board carries 49 resistors, 34 capacitors, 24 connectors, 13 ICs, 3 transistors and 2 modules.
From the project
Turn your A500 into an A2000
Turn your A500 into an A2000 with this sidecar backplane CHECKMATE VERSION NOT YET TESTED - DO NOT BUILD
DIEGO is a Zorro 2 backplane expansion for use on your A500 either as a side car project or within your Checkmate case. Diego gives you an A2000 compatible CO-PROCESSOR slot (side car version only) along with a full set of 5 ZORRO2 slots all made possible by the onboard Bluster IC. Bluster is a remake of the classic A2000 Buster chip by LIV2 although it is a custom version for DIEGO to handle inverted clocks and provide some further functions.

Main components on the Diego Checkmate
Diego Checkmate bill of materials (BOM)
126 components, 48 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C90569 BLUSTER | TQFP-64_10x10mm_P0.5mm | U1 |
| 2 | 74ALS245 | SO-20_5.3x12.6mm_P1.27mm | U2, U7 |
| 4 | 74LS245 | SO-20_5.3x12.6mm_P1.27mm | U3, U4, U5, U6 |
| 1 | 74LS32 | SO-14_3.9x8.65mm_P1.27mm | U8 |
| 1 | MAX16054AZT_T 74LS32 | SO-14_3.9x8.65mm_P1.27mm | U9 |
| 1 | 74LS08 | SO-14_3.9x8.65mm_P1.27mm | U10 |
| 1 | 501MLFT MAX16054 | SOT-23-6 | U11 |
| 1 | 74LVC2G14 | SOT-23-6 | U14 |
| 1 | MC79M05 | TO-252-2 | U15 |
| 1 | Fan 1 | FanPinHeader_1x03_P2.54mm_Vertical | M1 |
| 1 | Fan 2 | FanPinHeader_1x03_P2.54mm_Vertical | M2 |
| 3 | S8050 | SOT-23 | Q2, Q3, Q4 |
| 1 | C5173317 A500 side car | Samtec_HLE-150-02-xx-DV-TE_2x43_P2.54mm_Horizontal | CN1 |
| 1 | C5173320 Zorro 1 | Samtec_HLE-150-02-xx-DV-TE_2x50_P2.54mm_Horizontal | CN2 |
| 1 | C5173320 Zorro 2 | Samtec_HLE-150-02-xx-DV-TE_2x50_P2.54mm_Horizontal | CN3 |
| 1 | C5173320 Zorro 3 | Samtec_HLE-150-02-xx-DV-TE_2x50_P2.54mm_Horizontal | CN4 |
| 1 | C5173320 Zorro 4 | Samtec_HLE-150-02-xx-DV-TE_2x50_P2.54mm_Horizontal | CN5 |
| 1 | C5173320 Zorro 5 | Samtec_HLE-150-02-xx-DV-TE_2x50_P2.54mm_Horizontal | CN6 |
| 11 | 1000PF 1000pf | R_Array_Convex_4x0603 | CN7, CN8, CN9, CN10, CN11, CN12, CN13, CN14 +3 |
| 1 | CONN_01X03_PIN Conn_01x03_Pin | PinHeader_1x03_P2.54mm_Vertical | J1 |
Show 28 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | A2000_CPUSLOT_EDGE_LOGICAL Conn_01x04 | Molex_KK-396_A-41791-0004_1x04_P3.96mm_Vertical | J2 |
| 1 | Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | Power LED | PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | Buster | PinHeader_1x06_P2.54mm_Vertical | J7 |
| 1 | CONN_01X01_PIN Conn_01x01_Pin | PinHeader_1x01_P2.54mm_Vertical | J9 |
| 1 | ATX-24 | Molex_Mini-Fit_Jr_5566-24A_2x12_P4.20mm_Vertical | J10 |
| 1 | C15957 FerriteBead_Small | D_0805_2012Metric | FB1 |
| 10 | 0.1UF 0.1uf | C_0805_2012Metric | C1, C3, C8, C11, C12, C13, C14, C15 +2 |
| 6 | 220UF 220uF | CP_Elec_6.3x7.7 | C2, C4, C5, C6, C7, C10 |
| 2 | 220UF 0.1uf | C_0805_2012Metric | C9, C16 |
| 4 | 0.1UF 0.1uf | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C18, C19, C20, C21 |
| 1 | 1UF 47uF | CP_Elec_6.3x7.7 | C22 |
| 2 | 100PF 100pf | C_0805_2012Metric | C25, C26 |
| 1 | 0.1uf | C_0805_2012Metric | C35 |
| 2 | 1uF | CP_Elec_4x5.4 | C36, C38 |
| 5 | 47uF | CP_Elec_6.3x7.7 | C37, C39, C40, C41, C42 |
| 1 | 220uF | CP_Elec_6.3x7.7 | C43 |
| 12 | 1k | R_0805_2012Metric | R1, R2, R5, R6, R8, R14, R17, R24 +4 |
| 1 | 10k | R_0805_2012Metric | R3 |
| 3 | 47 | R_0805_2012Metric | R4, R16, R23 |
| 4 | 4.7K 4.7k | R_0805_2012Metric | R7, R9, R25, R26 |
| 1 | 3.3K 3.3k | R_0805_2012Metric | R10 |
| 3 | 10K 1k | R_0805_2012Metric | R11, R12, R13 |
| 1 | 680 1k | R_0805_2012Metric | R15 |
| 5 | 10K 10k | R_0805_2012Metric | R18, R19, R20, R21, R22 |
| 14 | 1k | R_Array_Convex_4x0603 | RN1, RN2, RN8, RN9, RN10, RN11, RN12, RN13 +6 |
| 4 | 3.3K 3.3k | R_Array_Convex_4x0603 | RN3, RN4, RN5, RN6 |
| 1 | 4.7K 4.7k | R_Array_Convex_4x0603 | RN7 |
Diego Checkmate design files
The KiCad project lives in the CRG-Glen/DIEGO-500 repository on GitHub; these links point at the commit this page was built from.
Diego Checkmate: common questions
How big is the Diego Checkmate PCB?
The Diego Checkmate measures 275 × 95 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Diego Checkmate?
126 components, from 48 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Diego Checkmate design files?
From the CRG-Glen/DIEGO-500 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Diego Checkmate design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which CRG-Glen chose for the repository.