5 open source boards using the 74ALS245

Real designs built with the 74ALS245, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

The 74ALS245 in open source designs

The gallery holds 5 open source boards using the 74ALS245 from 3 GitHub repositories; a typical one measures about 275 × 140 mm and carries around 128 components.

60% use four copper layers or more, and 60% carry an open source license.

The most starred is Diego 500 5 slot by CRG-Glen.

Parts used alongside the 74ALS245

Microcontrollers on boards using the 74ALS245

What boards using the 74ALS245 are built for

74ALS245: common questions

Where can I find a 74ALS245 reference design?

Each of the 5 boards on this page is a real design using the 74ALS245. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the 74ALS245?

The 74LS245, 74LS08 and 74LS32 appear in the most repositories here.

Which microcontrollers do boards using the 74ALS245 use?

Most are built on RP2040/RP2350 (1).

How big is a typical board using the 74ALS245?

The median is 275 × 140 mm, and 40% are two-layer designs.

What is the most popular open source board using the 74ALS245?

By GitHub stars, Diego 500 5 slot by CRG-Glen, with 25 stars.

Can I simulate one of these boards using the 74ALS245 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part