SAMD10
About the SAMD10 PCB
SAMD10 is an open source Microchip SAM PCB design by cristobalcuevas, published on GitHub. It is a 2-layer board measuring 34 × 18 mm, with 15 components from 13 distinct parts.
Its main chip is the ATSAMD10C14A-SS, from the Microchip SAM family. Other key parts include the AP7333-33SRG-7. By type, the board carries 4 connectors, 4 resistors, 3 capacitors, 2 ICs, 1 switch and 1 diode.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Projects with Kicad
Main components on the SAMD10
SAMD10 bill of materials (BOM)
15 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATSAMD10C14A-SS | SOIC-14_3.9x8.7mm_P1.27mm | U1 |
| 1 | AP7333-33SRG-7 | SOT-23 | U2 |
| 1 | SWD_PGM | PinHeader_2x03_P2.54mm_Vertical | J0 |
| 1 | GPIO_A | PinHeader_1x05_P2.54mm_Vertical | J1 |
| 1 | GPIO_B | PinHeader_1x05_P2.54mm_Vertical | J2 |
| 1 | Battery | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J3 |
| 1 | SW_Push | SW_PUSH_6mm | SW1 |
| 1 | LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | 0.1uF | C_0805_2012Metric | C1 |
| 2 | 1uF | C_0805_2012Metric | C2, C3 |
| 1 | 10k | R_0805_2012Metric | R1 |
| 2 | 1k | R_0805_2012Metric | R2, R3 |
| 1 | 330R | R_0805_2012Metric | R4 |
SAMD10 design files
The KiCad project lives in the cristobalcuevas/PCB-Designs repository on GitHub; these links point at the commit this page was built from.
- LayoutSAMD10/SAMD10.kicad_pcb
- SchematicSAMD10/SAMD10.kicad_sch
SAMD10: common questions
What microcontroller does the SAMD10 use?
The SAMD10 is built around the ATSAMD10C14A-SS, from the Microchip SAM family.
How big is the SAMD10 PCB?
The SAMD10 measures 34 × 18 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the SAMD10?
15 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the SAMD10 design files?
From the cristobalcuevas/PCB-Designs repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the SAMD10 design in my own project?
The repository has no license, so all rights stay with cristobalcuevas. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the SAMD10 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Microchip SAM firmware against it before you order a PCB.
More boards in PCB-Designs
STM32Mxed Signal
60 × 75 mm110 parts4LNo license0
Comm Board
100 × 100 mm64 parts4LNo license0
AVR/ArduinoArduino
68.6 × 53.3 mm45 parts2LNo license0
PICPIC18F4550
100 × 70 mm33 parts2LNo license0
STM32LoRaPill
50 × 50 mm32 parts2LNo license0
STM32STM32F103
42.7 × 34.5 mm28 parts2LNo license0
ACDC switching
108 × 48.3 mm24 parts2LNo license0
ESP32Shield ESP32
100 × 70 mm15 parts2LNo license0
STM32STM32F030
30 × 31 mm14 parts2LNo license0
USB to UART
39.4 × 19.1 mm14 parts2LNo license0
Sorting hat
79.1 × 66.4 mm12 parts2LNo license0
Similar boards
Microchip SAMFpgaboy
Wren6991
50 × 50 mm89 parts4LNo license508
Microchip SAMKira
kiibohd
366.9 × 114.3 mm400 partsCERN-OHL-1.2415
Microchip SAMDSKY driver
benkrasnow
43 × 92.3 mm44 partsMIT258
Microchip SAMDuet 2 Maestro
Duet3D
100 × 123 mm336 partsCERN-OHL-1.2257
Microchip SAMMakennbot
idlehandsdev
60 × 75 mm53 parts2LNo license175
Microchip SAMOxidized flash
blakesmith
61 × 21.6 mm19 parts2LNo license167