Shield ESP32
About the Shield ESP32
Shield ESP32 is an open source ESP32 PCB design by cristobalcuevas, published on GitHub. It is a 2-layer board measuring 100 × 70 mm, with 15 components from 14 distinct parts.
Its main chip is the ESP32_30, from the ESP32 family. By type, the board carries 11 connectors, 3 resistors and 1 IC.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Projects with Kicad
Main components on the Shield ESP32
Shield ESP32 bill of materials (BOM)
15 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32_30 | ESP32_30 | U1 |
| 1 | 2011H-2X05G01SJ030B CONECTORES | PinHeader_2x10_P2.54mm_Vertical | J1 |
| 1 | 2011-1X03G00SD025B SERVO_1 | PinHeader_1x03_P2.54mm_Horizontal | J2 |
| 1 | 2011-1X03G00SD025B SERVO_2 | PinHeader_1x03_P2.54mm_Horizontal | J3 |
| 1 | 2011-1X03G00SD025B SC_1 | PinHeader_1x03_P2.54mm_Horizontal | J4 |
| 1 | 2011-1X03G00SD025B SC_2 | PinHeader_1x03_P2.54mm_Horizontal | J5 |
| 1 | 2011-1X03G00SD025B DHT11 | PinHeader_1x03_P2.54mm_Horizontal | J6 |
| 1 | 2111-1X02G00SB LDR | PinHeader_1x02_P2.54mm_Horizontal | J7 |
| 1 | 2011-1X06G00SI032B SD | PinHeader_1x06_P2.54mm_Horizontal | J8 |
| 1 | 2011-1X03G00SD025B DS18B20_1 | PinHeader_1x03_P2.54mm_Horizontal | J9 |
| 1 | 2011-1X03G00SD025B DS18B20_2 | PinHeader_1x03_P2.54mm_Horizontal | J10 |
| 1 | 2111-1X05G00S-3.5-3.2B RTC | PinHeader_1x05_P2.54mm_Horizontal | J11 |
| 1 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 2 | 4.7k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R3 |
Shield ESP32 design files
The KiCad project lives in the cristobalcuevas/PCB-Designs repository on GitHub; these links point at the commit this page was built from.
Shield ESP32: common questions
What microcontroller does the Shield ESP32 use?
The Shield ESP32 is built around the ESP32_30, from the ESP32 family.
How big is the Shield ESP32?
The Shield ESP32 measures 100 × 70 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Shield ESP32?
15 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the Shield ESP32 design files?
From the cristobalcuevas/PCB-Designs repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Shield ESP32 design in my own project?
The repository has no license, so all rights stay with cristobalcuevas. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Shield ESP32 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in PCB-Designs
STM32Mxed Signal
60 × 75 mm110 parts4LNo license0
Comm Board
100 × 100 mm64 parts4LNo license0
AVR/ArduinoArduino
68.6 × 53.3 mm45 parts2LNo license0
PICPIC18F4550
100 × 70 mm33 parts2LNo license0
STM32LoRaPill
50 × 50 mm32 parts2LNo license0
STM32STM32F103
42.7 × 34.5 mm28 parts2LNo license0
ACDC switching
108 × 48.3 mm24 parts2LNo license0
Microchip SAMSAMD10
34 × 18 mm15 parts2LNo license0
STM32STM32F030
30 × 31 mm14 parts2LNo license0
USB to UART
39.4 × 19.1 mm14 parts2LNo license0
Sorting hat
79.1 × 66.4 mm12 parts2LNo license0
Similar boards
ESP32Open Book Abridged Edition
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1k
ESP32Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0k
ESP32Esp32 minimal
36.2 × 26.8 mm20 parts2LMIT4.0k
ESP32Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k
ESP32Controller
29 × 74 mm58 parts4LApache-2.03.8k
ESP32Bitaxe
skot
56.5 × 99.8 mm86 parts4LCERN-OHL-S-2.01.4k