GpsBreakout
About the GpsBreakout PCB
GpsBreakout is an open source PCB design by crnicholson, published on GitHub. It is a 2-layer board measuring 19.4 × 32.5 mm, with 17 components from 13 distinct parts.
Other key parts include the ATGM336H, BL24C32F-RRRC and AT2659. By type, the board carries 4 capacitors, 3 ICs, 3 resistors, 2 antennas, 2 inductors and 1 connector.
It belongs with the robotics & motion, power & battery and sensors designs in this gallery.
From the project
StratoSoar MK3, an autonomous glider meant for high-altitudes, accessible to everyone
TL:DR: The StratoSoar project is a low-cost, lightweight Unmanned Aerial Vehicle (UAV) designed for deployment from a weather balloon at various altitudes, aiming for autonomous and efficient flight to designated GPS coordinates. By offering a more affordable, compact, and lightweight alternative to conventional UAVs, StratoSoar aims to empower educators, researchers, and hobbyists with an accessible platform for exploration and experimentation.
Main components on the GpsBreakout
GpsBreakout bill of materials (BOM)
17 components, 13 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATGM336H | ATGM336H | U1 |
| 1 | BL24C32F-RRRC | SOT-23-5 | U2 |
| 1 | AT2659 | DFN150X100X80-6N | U3 |
| 1 | Header | PinHeader_1x11_P2.54mm_Vertical | J2 |
| 2 | GPS1003 | GPS1003 | AE1, AE2 |
| 1 | MS621R | MS621R | BT1 |
| 1 | C72038 YELLOW | LED_0603_1608Metric | D2 |
| 1 | 33 nH | L_0402_1005Metric | L1 |
| 1 | 6.8 nH | L_0402_1005Metric | L2 |
| 3 | 100 nF | C_0603_1608Metric | C2, C3, C5 |
| 1 | 470 pF | C_0402_1005Metric | C4 |
| 2 | 1.8 K | R_0603_1608Metric | R2, R3 |
| 1 | 1 K | R_0402_1005Metric | R7 |
GpsBreakout design files
The KiCad project lives in the crnicholson/StratoSoar-MK3 repository on GitHub; these links point at the commit this page was built from.
GpsBreakout: common questions
How big is the GpsBreakout PCB?
The GpsBreakout measures 19.4 × 32.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the GpsBreakout?
17 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the GpsBreakout design files?
From the crnicholson/StratoSoar-MK3 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the GpsBreakout design in my own project?
The repository has no license, so all rights stay with crnicholson. Use it as a reference, and ask the author before reusing the design.
More boards in StratoSoar-MK3
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2k
Sensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8k
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0k
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
Microphone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2k