Starbie

Cryptoblade9623·Starbie·Files/KiCad/Starbie.kicad_pcb

Starbie PCB layout, top view — open source ESP32 board by Cryptoblade9623

About the Starbie PCB

Starbie is an open source ESP32 PCB design by Cryptoblade9623, published on GitHub. It is a 2-layer board measuring 85.6 × 98.8 mm, with 7 components from 6 distinct parts.

Its main chip is the XIAO-ESP32-C3-SMD, from the ESP32 family. Other key parts include the DHT11. By type, the board carries 2 ICs, 2 connectors, 2 switches and 1 resistor.

It belongs with the sensors and displays & leds designs in this gallery.

From the project

Motion and button controlled pet with an OLED display, humidity and temperature sensor and motion sensor.

Starbie, from the project README
From the project README

Main components on the Starbie

Starbie bill of materials (BOM)

7 components, 6 distinct parts.

QtyPartRefs
1
XIAO-ESP32-C3-SMD
U3
1
DHT11
U4
1
OLED
J3
1
MPU6050
J4
2
SW_Push
SW3, SW4
1
10K
R2

Starbie design files

The KiCad project lives in the Cryptoblade9623/Starbie repository on GitHub; these links point at the commit this page was built from.

Starbie: common questions

What microcontroller does the Starbie use?

The Starbie is built around the XIAO-ESP32-C3-SMD, from the ESP32 family.

How big is the Starbie PCB?

The Starbie measures 85.6 × 98.8 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Starbie?

7 components, from 6 distinct parts. The full bill of materials is listed on this page.

Where can I download the Starbie design files?

From the Cryptoblade9623/Starbie repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Starbie design in my own project?

The repository has no license, so all rights stay with Cryptoblade9623. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Starbie without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards