Temperature sesor

cs-pub-ro·smart-solar-irradiance-sensor·schematics/temperature_sesor/temperature_sesor.kicad_pcb

Temperature sesor PCB layout, top view — open source board by cs-pub-ro

About the Temperature sesor PCB

Temperature sesor is an open source PCB design by cs-pub-ro, published on GitHub. It is a 2-layer board measuring 13.5 × 24.7 mm, with 8 components from 8 distinct parts.

Other key parts include the FT2232D. By type, the board carries 4 jumpers, 2 capacitors, 1 IC and 1 connector.

It belongs with the sensors, iot & wireless and power & battery designs in this gallery.

From the project

Open-source hardware & software for a smart wireless sensor that measures solar irradiance.

This repository contains the source code (both software/firmware code and hardware schematics) for a smart wireless sensor that measures solar irradiance using a single small photovoltaic module that simultaneously serves as the energy harvester and sensing element.

The device integrates a low-power ESP32 microcontroller, a precision multi-channel ADC, and a programmable electronic load to sweep the PV I–V curve and estimate the MPPT. Irradi- ance is then computed from electrical power and the solar-cell temperature via a third-order polynomial derived from laboratory calibration and field…

Main components on the Temperature sesor

Temperature sesor bill of materials (BOM)

8 components, 8 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
FT2232D
TMP117xxDRV
U1
1
I2C_CON
J3
1
SOLDERJUMPER_2_OPEN
0X49
JP1
1
SOLDERJUMPER_2_OPEN
0X4A
JP2
1
0X4B
JP3
1
0X48
JP4
1
100NF
1uF
C1
1
18PF
100nF
C2

Temperature sesor design files

The KiCad project lives in the cs-pub-ro/smart-solar-irradiance-sensor repository on GitHub; these links point at the commit this page was built from.

Temperature sesor: common questions

How big is the Temperature sesor PCB?

The Temperature sesor measures 13.5 × 24.7 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Temperature sesor?

8 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Temperature sesor design files?

From the cs-pub-ro/smart-solar-irradiance-sensor repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Temperature sesor design in my own project?

The repository has no license, so all rights stay with cs-pub-ro. Use it as a reference, and ask the author before reusing the design.

More boards in smart-solar-irradiance-sensor

Similar boards