Supercapacitors balancing

cs-pub-ro·smart-solar-irradiance-sensor·schematics/supercapacitors_balancing/supercapacitors balancing.kicad_pcb

Supercapacitors balancing PCB layout, top view — open source board by cs-pub-ro

About the Supercapacitors balancing PCB

Supercapacitors balancing is an open source PCB design by cs-pub-ro, published on GitHub. It is a 2-layer board measuring 21 × 92 mm, with 30 components from 23 distinct parts.

Other key parts include the FT2232D, M93C66-RMN3TP/K, TPD2S017 and MCP16311T-E/MS. By type, the board carries 16 resistors, 5 fuses, 4 ICs, 4 capacitors and 1 connector.

It belongs with the iot & wireless, power & battery and sensors designs in this gallery.

From the project

Open-source hardware & software for a smart wireless sensor that measures solar irradiance.

This repository contains the source code (both software/firmware code and hardware schematics) for a smart wireless sensor that measures solar irradiance using a single small photovoltaic module that simultaneously serves as the energy harvester and sensing element.

The device integrates a low-power ESP32 microcontroller, a precision multi-channel ADC, and a programmable electronic load to sweep the PV I–V curve and estimate the MPPT. Irradi- ance is then computed from electrical power and the solar-cell temperature via a third-order polynomial derived from laboratory calibration and field…

Main components on the Supercapacitors balancing

FT2232DM93C66-RMN3TP/KTPD2S017MCP16311T-E/MS

Supercapacitors balancing bill of materials (BOM)

30 components, 23 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
FT2232D
TL431LP
U1
1
M93C66-RMN3TP/K
TL431LP
U2
1
TPD2S017
TL431LP
U3
1
MCP16311T-E/MS
TL431LP
U4
1
VCC
J1
3
1A
F1, F2, F4
1
200MA
1A
F3
1
500MA
1A
F5
2
100NF
100F 2.7V
C1, C4
2
18PF
100F 2.7V
C2, C3
2
330
12k
R6, R7
1
2K2
180k
R8
1
10K
12k
R9
1
100K
12k
R10
1
100M
180k
R11
1
100M
12k
R12
1
100
12k
R13
1
100K
180k
R14
1
32K4
12k
R15
1
2K2
12k
R16
Show 3 more
QtyPartRefs
1
3K3
180k
R17
1
32K4
1
R18
3
10K
1
R19, R20, R21

Supercapacitors balancing design files

The KiCad project lives in the cs-pub-ro/smart-solar-irradiance-sensor repository on GitHub; these links point at the commit this page was built from.

Supercapacitors balancing: common questions

How big is the Supercapacitors balancing PCB?

The Supercapacitors balancing measures 21 × 92 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Supercapacitors balancing?

30 components, from 23 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Supercapacitors balancing design files?

From the cs-pub-ro/smart-solar-irradiance-sensor repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Supercapacitors balancing design in my own project?

The repository has no license, so all rights stay with cs-pub-ro. Use it as a reference, and ask the author before reusing the design.

More boards in smart-solar-irradiance-sensor

Similar boards