EEE3088 Power
CScheepers1504·Micromouse·Power Subsystem/EEE3088_Power.kicad_pcb
About the EEE3088 Power PCB
EEE3088 Power is an open source PCB design by CScheepers1504, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 22.4 × 22 mm, with 13 components from 12 distinct parts.
Other key parts include the DRV8837 and MCP73831-2-OT. By type, the board carries 4 capacitors, 3 ICs, 2 resistors, 1 connector, 1 switch and 1 diode.
It belongs with the robotics & motion, power & battery and sensors designs in this gallery.
From the project
A third-year engineering design project to create a micromouse created by Jacques Du Preez and Chris Scheepers
- ## Included Files: - Datasheets: Datasheets for components used in the Power and Sensing modules. - Production Files: Files required for manufacturing the Power and Sensing module, including Gerber files and Bill of Materials (BOM). - Schematics: Schematics for Power and Sensing modules.
- NOTE: Production and files associated with the production were designed and used with jlcpcb as the manufacturer in mind.
Main components on the EEE3088 Power
EEE3088 Power bill of materials (BOM)
13 components, 12 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | DRV8837 | WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm | U1, U2 |
| 1 | MCP73831-2-OT | SOT-23-5 | U3 |
| 1 | CONN_02X14_ODD_EVEN Conn_01x16_Male | PinHeader_2x08_P2.54mm_Vertical | J1 |
| 1 | Conn_01x02_Female | JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | JSTPH1 |
| 1 | SW_SPDT | SW_SP3T_PCM13 | SW1 |
| 1 | SFH205F LED | D_0402_1005Metric_Pad0.77x0.64mm_HandSolder | D1 |
| 1 | 4.7UF 0.1u | CP_Elec_3x5.3 | C2 |
| 1 | 100NF 0.1u | CP_Elec_3x5.3 | C3 |
| 1 | 100NF 4.7u | CP_Elec_3x5.3 | C5 |
| 1 | 4.7UF 4.7u | CP_Elec_3x5.3 | C6 |
| 1 | 100K 2K | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1 |
| 1 | 10K 470 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2 |
EEE3088 Power design files
The KiCad project lives in the CScheepers1504/Micromouse repository on GitHub; these links point at the commit this page was built from.
EEE3088 Power: common questions
How big is the EEE3088 Power PCB?
The EEE3088 Power measures 22.4 × 22 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the EEE3088 Power?
13 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the EEE3088 Power design files?
From the CScheepers1504/Micromouse repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the EEE3088 Power design in my own project?
Yes, under the terms of its GPL-3.0 license, which CScheepers1504 chose for the repository.
More boards in Micromouse
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kEinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2k