XBT Autolauncher 3.0
cxs1529·XBT_Autolauncher_PCB·AOML_AB_3.0/AOML_AB_3.0_reorganized-v3.kicad_pcb
About the XBT Autolauncher 3.0 PCB
XBT Autolauncher 3.0 is an open source STM32 PCB design by cxs1529, published on GitHub. It is a 2-layer board measuring 310 × 100 mm, with 216 components from 61 distinct parts.
Its main chip is the STM32F103RBTx, from the STM32 family. Other key parts include the CD4043BDR, DRV8825PWPR, SN74LVC1G3157DCKR, L7812ABD2T-TR and LM7805MPX. By type, the board carries 70 capacitors, 54 resistors, 29 ICs, 24 connectors, 13 jumpers and 12 relays.
From the project
KiCAD repository for the XBT Autolauncher board
AOML AB V2.2 > currently in use but most components are not produced anymore. Based on PIC18F8722-I/PT
AOML AB V3.0 > new version. Based on STM32F103RB ALV3.0 firmware: autolauncher_6
Main components on the XBT Autolauncher 3.0
XBT Autolauncher 3.0 bill of materials (BOM)
216 components, 61 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | CD4043BDR | SOIC127P600X175-16N | IC1, IC2 |
| 8 | DRV8825PWPR | SOP65P640X120-29N | IC3, IC4, IC5, IC6, IC7, IC8, IC9, IC10 |
| 1 | SN74LVC1G3157DCKR | SOT65P210X110-6N | IC11 |
| 1 | L7812ABD2T-TR | DPAK_BD2T-TR_STM | U1 |
| 1 | LM7805MPX | SOT-223-3_TabPin2 | U2 |
| 1 | MCP1825ST-3302E/DB | SOT-223-3_TabPin2 | U3 |
| 1 | MAX3232 | TSSOP-16_4.4x5mm_P0.65mm | U4 |
| 1 | INA213AIDCKR | DCK0006A_L | U5 |
| 1 | STM32F103RBTx | LQFP64-10x10mm | U6 |
| 1 | AT24C01D-STUM-T | SOT-23-5 | U7 |
| 2 | ULN2003ADR | D0016A_L | U8, U9 |
| 8 | TLP170AM | MFSOP6-4_4.4x3.6mm_P1.27mm | U10, U11, U12, U13, U14, U15, U16, U17 |
| 1 | LMV321B-TR | S5TSOT23-5-A_TPK-M | U18 |
| 1 | BSS138 | SC-70_SOT323_NEX-M | Q1 |
| 1 | 8MHz | XTAL_ABM3-8.000MHZ-D2Y-T_ABR-M | Y1 |
| 1 | Conn_01x04 | CONN_61300411121_WRE | J1 |
| 1 | 216550-1 | CONN_216550-1_TEC | J2 |
| 9 | Conn_01x03 | CUI_TBP02R2-381-03BE | J3, J8, J9, J10, J11, J12, J13, J14 +1 |
| 1 | Conn_01x07 | PinSocket_1x07_P2.54mm_Vertical | J4 |
| 1 | Conn_01x03 | PinSocket_1x03_P2.54mm_Vertical | J5 |
Show 41 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Screw_Terminal_01x07 | CUI_TB001-500-07BE | J7 |
| 8 | 216548-1 | CONN_216548-1_TYC | J16, J17, J18, J19, J20, J21, J22, J23 |
| 1 | Conn_01x02 | PinSocket_1x02_P2.54mm_Vertical | J24 |
| 1 | Conn_01x03 | PinHeader_1x03_P2.54mm_Vertical | J25 |
| 1 | 1A | 0ZCG_BEL | F1 |
| 10 | SolderJumper_2_Open | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2, JP4, JP5, JP12, JP13, JP14, JP15 +2 |
| 3 | SolderJumper_3_Open | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP6, JP7, JP8 |
| 12 | TX2-L2-5V | RELAY_TX2_L2_PAN | K1, K2, K3, K4, K5, K6, K7, K8 +4 |
| 1 | 10k | POT_TC33_3X3P8_BRN | RV1 |
| 1 | TS02-66-70-BK-160-LCR-D | SMT_FS | SW1 |
| 1 | SW_DIP_x03 | SW_DS01C-254-L-03BE | SW2 |
| 1 | B340AE-13 | CR_SMA_320-340AE_DIO | D1 |
| 2 | 3.3V | SOD3715X135N | D2, D3 |
| 4 | led | LED_B1911PG--20D000514U1930_HVK | D4, D5, D6, D7 |
| 1 | 100 | IND_25_0805_FRT | FB1 |
| 1 | 0.33u | CAP_CL21_SAM | C1 |
| 1 | 0.22u | CAPC2012X135N | C2 |
| 3 | 1u | CAP_CL21_SAM | C3, C10, C14 |
| 1 | 10u | CAP_WCAP-ATG5_05.0X11.0_WRE | C4 |
| 1 | 1000u | CAP_PK&slash_PZ_10X16_LOW_RUB | C5 |
| 42 | 0.1u | CAP_CL21_SAM | C6, C7, C8, C9, C11, C16, C17, C18 +34 |
| 10 | 100u | PCAP_8x112_PAN | C12, C13, C30, C31, C32, C48, C49, C50 +2 |
| 1 | 0.47u | CAP_CL_21_SAM | C15 |
| 2 | 20p | CAPC220145_88N_KEM | C20, C23 |
| 8 | 0.01u | CAP_CL21_SAM | C42, C43, C44, C60, C61, C62, C74, C75 |
| 1 | 6.8k | RC0805N_YAG | R1 |
| 1 | 3.3k | RC0805N_YAG | R2 |
| 1 | 47k | RC0805N_YAG | R3 |
| 2 | 5.1k | RC0805N_YAG | R4, R48 |
| 1 | 0.1 | RESC6331X89N | R5 |
| 4 | 10k | RC0805N_YAG | R6, R9, R49, R50 |
| 2 | 4.7k | RC0805N_YAG | R7, R8 |
| 1 | 5k | Y1453_VIS | R10 |
| 1 | 15k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R11 |
| 16 | 1 | RC0805N_YAG | R12, R13, R14, R15, R16, R17, R21, R22 +8 |
| 8 | 1M | RC0805N_YAG | R18, R19, R20, R27, R28, R29, R34, R35 |
| 10 | 330 | RC0805N_YAG | R36, R37, R38, R39, R40, R41, R42, R43 +2 |
| 1 | 2.4k | RC0805N_YAG | R44 |
| 1 | 750 | RC0805N_YAG | R45 |
| 2 | 746X101103JP | 746X101103JP-3 | RN1, RN3 |
| 2 | 10k | RESCAXS80P320X160X70-8N | RN2, RN4 |
XBT Autolauncher 3.0 design files
The KiCad project lives in the cxs1529/XBT_Autolauncher_PCB repository on GitHub; these links point at the commit this page was built from.
XBT Autolauncher 3.0: common questions
What microcontroller does the XBT Autolauncher 3.0 use?
The XBT Autolauncher 3.0 is built around the STM32F103RBTx, from the STM32 family.
How big is the XBT Autolauncher 3.0 PCB?
The XBT Autolauncher 3.0 measures 310 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the XBT Autolauncher 3.0?
216 components, from 61 distinct parts. The full bill of materials is listed on this page.
Where can I download the XBT Autolauncher 3.0 design files?
From the cxs1529/XBT_Autolauncher_PCB repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the XBT Autolauncher 3.0 design in my own project?
The repository has no license, so all rights stay with cxs1529. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the XBT Autolauncher 3.0 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in XBT_Autolauncher_PCB
Earlier revisions in the repo: AOML_AB_3.0_reorganized-v2, AOML_AB_3.0_reorganized-v1
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k