13 open source boards using the SN74LVC1G3157DCKR

Real designs built with the SN74LVC1G3157DCKR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

13 boardsClear filters|Most starred

How designs wire the SN74LVC1G3157DCKR

Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the SN74LVC1G3157DCKR connects to, and the resistors, capacitors and other passives placed on it.

  • The B2 pin has a series resistor on 7 of 11 designs, most often 100 kΩ (then 33 kΩ).
  • The VCC pin has a decoupling capacitor on 7 of 11 designs, most often 100 nF (then 1 µF).
  • The B1 pin has a series resistor on 5 of 11 designs, most often 1 kΩ (then 100 kΩ).
B2pin 1Connected to: Signal 91%
  • Series resistor on 64% · 100 kΩ (1), 33 kΩ (1), 3 kΩ (1)
GNDpin 2Connected to: GND 82% · a signal 18%
B1pin 3Connected to: Signal 73% · not connected 18%
  • Series resistor on 45% · 1 kΩ (2), 100 kΩ (1), 33 kΩ (1)
Apin 4Connected to: Signal 100%
  • Series resistor on 36% · 10 kΩ (1), 6.2 kΩ (1), 36 kΩ (1)
VCCpin 5Connected to: 5V 82% · a signal 18%
  • Decoupling capacitor on 64% · 100 nF (10), 1 µF (2), 10 µF (1)
Spin 6Connected to: SN74LVC1G3157DCKR 36%, the microcontroller 36%
  • Resistor to GND on 36% · 10 kΩ (2), 47 kΩ (1), 100 kΩ (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include EEZ DIB MCU r1B1 by eez-open, ZC95 MKII by CrashOverride85, Lights by QuinnFreedman and EEZ DIB DCP405plus by eez-open.

The SN74LVC1G3157DCKR in open source designs

The gallery holds 13 open source boards using the SN74LVC1G3157DCKR from 11 GitHub repositories; a typical one measures about 139 × 100 mm and carries around 191 components.

64% are two-layer designs, the rest use four layers or more, and 62% carry an open source license.

The most starred is EEZ DIB MCU r1B2 by eez-open.

Microcontrollers on boards using the SN74LVC1G3157DCKR

SN74LVC1G3157DCKR: common questions

Where can I find a SN74LVC1G3157DCKR reference design?

Each of the 13 boards on this page is a real design using the SN74LVC1G3157DCKR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the SN74LVC1G3157DCKR B2 pin?

The B2 pin has a series resistor on 7 of 11 designs, most often 100 kΩ (then 33 kΩ). Counted from the KiCad layouts of 11 open source designs using the SN74LVC1G3157DCKR.

What decoupling capacitors do designs use on the SN74LVC1G3157DCKR VCC pin?

The VCC pin has a decoupling capacitor on 7 of 11 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 11 open source designs using the SN74LVC1G3157DCKR.

What resistor goes on the SN74LVC1G3157DCKR B1 pin?

The B1 pin has a series resistor on 5 of 11 designs, most often 1 kΩ (then 100 kΩ). Counted from the KiCad layouts of 11 open source designs using the SN74LVC1G3157DCKR.

What parts are used alongside the SN74LVC1G3157DCKR?

The AP2114H-3.3TRG1, DAC8552IDGKR, LPC54616J512BD100, LTV-846S and MC78L05 appear in the most repositories here.

Which microcontrollers do boards using the SN74LVC1G3157DCKR use?

Most are built on RP2040/RP2350 (5), STM32 (4) and NXP (2).

How big is a typical board using the SN74LVC1G3157DCKR?

The median is 139 × 100 mm, and 64% are two-layer designs.

What is the most popular open source board using the SN74LVC1G3157DCKR?

By GitHub stars, EEZ DIB MCU r1B2 by eez-open, with 394 stars.

Can I simulate one of these boards using the SN74LVC1G3157DCKR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part