Starbie

D-e-e-t-s·jubilant-waffle

Starbie PCB layout, top view — open source ESP32 board by D-e-e-t-s

About the Starbie PCB

Starbie is an open source ESP32 PCB design by D-e-e-t-s, published on GitHub. It is a 2-layer board measuring 95 × 85 mm, with 7 components from 6 distinct parts.

Its main chip is the XIAO-ESP32-C3-SMD, from the ESP32 family. Other key parts include the DHT11. By type, the board carries 2 ICs, 2 connectors, 2 switches and 1 resistor.

It belongs with the displays & leds designs in this gallery.

From the project

This project is a starbie which basically works as a starboy. I made this as part of the half-life program for week 1, with my goal of getting a 3d printer and learning more about hardware. I wanted my first hardware project to also reflect some of my interests so I added some Av

This project is a starbie which basically works as a starboy. I made this as part of the half-life program for week 1, with my goal of getting a 3d printer and learning more about hardware. I wanted my first hardware project to also reflect some of my interests so I added some Avatar The Last Airbender elements to it.

I first started off by creating my schematic. In this step I added all the components that will be added to my starbie. I also attached some GNDs and other tiny components to these bigger components. The picture below is a how the schematic ended up looking like after adding…

Starbie, from the project README
From the project README

Main components on the Starbie

Starbie bill of materials (BOM)

7 components, 6 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
XIAO-ESP32-C3-SMD
U1
1
DHT11
U2
1
CONN_01X08_PIN
Conn_01x08_Pin
J1
1
CONN_01X04_PIN
Conn_01x04_Pin
J2
2
SW_Push
SW1, SW2
1
10K
10k
R1

Starbie design files

The KiCad project lives in the D-e-e-t-s/jubilant-waffle repository on GitHub; these links point at the commit this page was built from.

Starbie: common questions

What microcontroller does the Starbie use?

The Starbie is built around the XIAO-ESP32-C3-SMD, from the ESP32 family.

How big is the Starbie PCB?

The Starbie measures 95 × 85 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Starbie?

7 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Starbie design files?

From the D-e-e-t-s/jubilant-waffle repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Starbie design in my own project?

The repository has no license, so all rights stay with D-e-e-t-s. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Starbie without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in jubilant-waffle

Similar boards