Starbierightbuttons
d3wzs·starbie·Starbie-Design-Files/Starbie-R/starbierightbuttons.kicad_pcb
About the Starbierightbuttons PCB
Starbierightbuttons is an open source ESP32 PCB design by d3wzs, published on GitHub. It is a 2-layer board measuring 96.5 × 83.8 mm, with 7 components from 6 distinct parts.
Its main chip is the XIAO-ESP32-C3-SMD, from the ESP32 family. Other key parts include the DHT11. By type, the board carries 2 ICs, 2 connectors, 2 switches and 1 resistor.
It belongs with the displays & leds designs in this gallery.
From the project
This is a variation of the starbie project by Hackclub's Half life, made by me d3wzs. It has a refinded design of the original with a beautiful handmade star design based off old tomagochis.
This is a variation of the starbie project by Hackclub's Half life, made by me d3wzs. It has a refinded design of the original with a beautiful handmade star design based off old tomagochis.
Starbie feautures a display, 2 buttons, in multiple layouts, an 0.96" oled as a screen, and a esp32 mini as the main controller. There are various other compenents that aernt as important that you can read of in the repository.
Main components on the Starbierightbuttons
Starbierightbuttons bill of materials (BOM)
7 components, 6 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-ESP32-C3-SMD | XIAO-ESP32-C6-DIP | U1 |
| 1 | DHT11 | Aosong_DHT11_5.5x12.0_P2.54mm | U2 |
| 1 | Conn_01x04_Pin | Display_128x64_096_I2C | J1 |
| 1 | Conn_01x08_Pin | PinHeader_1x08_P2.54mm_Vertical | J2 |
| 2 | SW_Push | SW_Cherry_MX_1.00u_PCB | SW1, SW2 |
| 1 | 10K | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
Starbierightbuttons design files
The KiCad project lives in the d3wzs/starbie repository on GitHub; these links point at the commit this page was built from.
Starbierightbuttons: common questions
What microcontroller does the Starbierightbuttons use?
The Starbierightbuttons is built around the XIAO-ESP32-C3-SMD, from the ESP32 family.
How big is the Starbierightbuttons PCB?
The Starbierightbuttons measures 96.5 × 83.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Starbierightbuttons?
7 components, from 6 distinct parts. The full bill of materials is listed on this page.
Where can I download the Starbierightbuttons design files?
From the d3wzs/starbie repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Starbierightbuttons design in my own project?
The repository has no license, so all rights stay with d3wzs. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Starbierightbuttons without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in starbie
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k