FLWSB-SAMDaaNo21

DaanDekoningKrekels·FLWSB-SAMDaaNo21

FLWSB-SAMDaaNo21 PCB layout, top view — open source Microchip SAM board by DaanDekoningKrekels

About the FLWSB-SAMDaaNo21 PCB

FLWSB-SAMDaaNo21 is an open source Microchip SAM PCB design by DaanDekoningKrekels, published on GitHub. It is a 4-layer board measuring 85.7 × 21 mm, with 32 components from 23 distinct parts.

Its main chip is the ATSAMD21G18A-A, from the Microchip SAM family. Other key parts include the LD1117S33TR_SOT223 and RN2483. By type, the board carries 11 capacitors, 5 connectors, 5 resistors, 3 ICs, 3 test points and 2 diodes.

It belongs with the sensors designs in this gallery.

From the project

Het FLWSB Main Board is een microcontroller bord gebaseerd op de ATSAM D21 in de vormfactor vergelijkbaar met een Arduino Nano. Het moet gemakkelijk zijn om dit bord in een breadboard te prikken en zo testen uit te voeren of schakelingen te bouwen.

Het FLWSB Main Board is een microcontroller bord gebaseerd op de ATSAM D21 in de vormfactor vergelijkbaar met een Arduino Nano. Het moet gemakkelijk zijn om dit bord in een breadboard te prikken en zo testen uit te voeren of schakelingen te bouwen.

Het is handig om een printplaat te kunnen ontwikkelen waar de SAMDaaNo21 opgeprikt kan worden.

Om dit proces te vergemakkelijken is er een KiCad bibliotheek ontwikkeld, die bevat een symbol, footprint en 3D-model.

FLWSB-SAMDaaNo21, from the project README
From the project README

Main components on the FLWSB-SAMDaaNo21

FLWSB-SAMDaaNo21 bill of materials (BOM)

32 components, 23 distinct parts.

QtyPartRefs
1
LD1117S33TR_SOT223
U1
1
ATSAMD21G18A-A
U2
1
RN2483
U3
1
Crystal_Small
Y1
1
USB4085-GF-A_REVA4
J1
1
DEBUG
J2
2
Conn_01x15_Male
J3, J4
1
Conn_Coaxial
J6
1
SW_RESET
SW1
1
VBUS
TP1
1
VDD
TP2
1
VIN
TP3
1
PRTR5V0U2X
D1
1
D_Schottky
D6
1
10µH
L1
5
100nF
C1, C2, C9, C10, C11
3
10µF
C4, C7, C8
1
18pF
C6
2
1µF
C12, C13
1
330
R1
Show 3 more
QtyPartRefs
1
1k
R2
1
10k
R3
2
4.7k
R5, R6

FLWSB-SAMDaaNo21 design files

The KiCad project lives in the DaanDekoningKrekels/FLWSB-SAMDaaNo21 repository on GitHub; these links point at the commit this page was built from.

FLWSB-SAMDaaNo21: common questions

What microcontroller does the FLWSB-SAMDaaNo21 use?

The FLWSB-SAMDaaNo21 is built around the ATSAMD21G18A-A, from the Microchip SAM family.

How big is the FLWSB-SAMDaaNo21 PCB?

The FLWSB-SAMDaaNo21 measures 85.7 × 21 mm, has 4 copper layers and is 4.69 mm thick.

How many components are on the FLWSB-SAMDaaNo21?

32 components, from 23 distinct parts. The full bill of materials is listed on this page.

Where can I download the FLWSB-SAMDaaNo21 design files?

From the DaanDekoningKrekels/FLWSB-SAMDaaNo21 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the FLWSB-SAMDaaNo21 design in my own project?

The repository has no license, so all rights stay with DaanDekoningKrekels. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the FLWSB-SAMDaaNo21 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Microchip SAM firmware against it before you order a PCB.

Similar boards