USIC
dabridgham·USIC
About the USIC PCB
USIC is an open source FPGA PCB design by dabridgham, published on GitHub. It is a 6-layer board measuring 214.1 × 265.6 mm, with 245 components from 61 distinct parts.
Its main chip is the XC7A75T-CSG324, from the FPGA family. Other key parts include the MT25Q-so8, FT2232HQ, 93CxxC, TPS2561 and MAX3033E. By type, the board carries 100 capacitors, 76 resistors, 45 ICs, 10 diodes, 9 connectors and 2 crystals.
It belongs with the retro computing designs in this gallery.
From the project
Unibus Storage and I/O Card
Main components on the USIC
USIC bill of materials (BOM)
245 components, 61 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MT25Q-so8 | DFN-8-1EP_6x5mm_P1.27mm_EP4x4mm | U101 |
| 1 | XC7A75T-CSG324 | Xilinx_CSG324 | U102 |
| 1 | FT2232HQ | QFN-64-1EP_9x9mm_P0.5mm_EP4.35x4.35mm_ThermalVias | U201 |
| 1 | 93CxxC | DFN-8-1EP_3x2mm_P0.5mm_EP1.3x1.5mm | U202 |
| 1 | TPS2561 | VSON-10-1EP_3x3mm_P0.5mm_EP1.65x2.4mm_ThermalVias | U203 |
| 1 | MAX3033E | TSSOP-16_4.4x5mm_P0.65mm | U204 |
| 1 | USB3340 | QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mm | U205 |
| 16 | DS8641-LR | DIP-16_W7.62mm | U301, U303, U307, U308, U309, U310, U314, U318 +8 |
| 16 | 74LVC7T245 | SSOP-24_5.3x8.2mm_P0.65mm | U302, U304, U305, U306, U311, U312, U313, U315 +8 |
| 4 | TPS82085 | Texas_SIL0008D_MicroSiP-8-1EP_2.8x3mm_P0.65mm_EP1.1x1.9mm_ThermalVias | U401, U402, U403, U404 |
| 1 | IS43TR16128B | BGA-96_9.0x13.0mm_Layout2x3x16_P0.8mm | U501 |
| 1 | TPS51206 | WSON-10-1EP_2x2mm_P0.4mm_EP0.9x1.5mm_ThermalVias | U502 |
| 1 | ASE-24.000MHz | Oscillator_SMD_Abracon_ASE-4Pin_3.2x2.5mm | X201 |
| 1 | 12 MHz | Crystal_SMD_Abracon_ABM10-4Pin_2.5x2.0mm | Y201 |
| 1 | USB_B_Micro | USB_Micro-B_Molex_47346-0001 | J201 |
| 1 | SD 0 | microSD_HC_Hirose_DM3BT-DSF-PEJS | J202 |
| 1 | USB_A | USB-A-Amphenol-UE27 | J203 |
| 1 | SD 1 | microSD_HC_Hirose_DM3BT-DSF-PEJS | J204 |
| 1 | SPC_C | DEC_Edge_Fingers_single_height | J301 |
| 1 | SPC_D | DEC_Edge_Fingers_single_height | J302 |
Show 41 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SPC_E | DEC_Edge_Fingers_single_height | J303 |
| 1 | SPC_F | DEC_Edge_Fingers_single_height | J304 |
| 1 | Indicator Panel | Box_Header_2x05_P2.54mm | P201 |
| 1 | Config | SW_DIP_SPSTx08_Slide_6.7x21.88mm_W6.73mm_P2.54mm_LowProfile_JPin | S201 |
| 10 | green | LED_0603_1608Metric | D101, D201, D202, D203, D204, D205, D206, D207 +2 |
| 2 | Ferrite_Bead_Small | L_0805_2012Metric | FB201, FB202 |
| 13 | 22µF 10V | C_0603_1608Metric | C101, C102, C103, C104, C106, C218, C226, C401 +5 |
| 67 | 100nF | C_0603_1608Metric | C105, C201, C202, C203, C204, C205, C206, C207 +59 |
| 2 | 4.7µF 6.3V | C_0603_1608Metric | C208, C210 |
| 1 | 3.3µF 6.3V | C_0603_1608Metric | C213 |
| 2 | 8pF | C_0603_1608Metric | C215, C216 |
| 1 | 150µF | CP_EIA-6032-28_Kemet-C | C221 |
| 2 | 1µF | C_0603_1608Metric | C224, C225 |
| 1 | 10nF | C_0603_1608Metric | C228 |
| 10 | 10µF 10V | C_0603_1608Metric | C402, C403, C404, C406, C408, C410, C503, C504 +2 |
| 1 | 220nF | C_0603_1608Metric | C507 |
| 4 | 4.7k | R_0603_1608Metric | R101, R102, R105, R106 |
| 1 | 2.4k | R_0603_1608Metric | R103 |
| 11 | 240 | R_0603_1608Metric | R104, R201, R202, R203, R204, R205, R206, R209 +3 |
| 1 | 1k | R_0603_1608Metric | R207 |
| 1 | 12k 1% | R_0603_1608Metric | R208 |
| 6 | 10k | R_0603_1608Metric | R211, R212, R213, R504, R505, R506 |
| 1 | 2.2k | R_0603_1608Metric | R215 |
| 2 | 100k | R_0603_1608Metric | R216, R217 |
| 2 | 4.7 | R_0603_1608Metric | R218, R226 |
| 10 | 50k | R_0603_1608Metric | R219, R220, R221, R222, R223, R227, R228, R229 +2 |
| 1 | 56.2k | R_0603_1608Metric | R224 |
| 1 | 20k | R_0603_1608Metric | R225 |
| 1 | 8.06k | R_0603_1608Metric | R232 |
| 10 | 330 | R_0603_1608Metric | R301, R302, R303, R304, R305, R306, R307, R308 +2 |
| 10 | 680 | R_0603_1608Metric | R311, R312, R313, R314, R315, R316, R317, R318 +2 |
| 1 | 499k | R_0603_1608Metric | R401 |
| 1 | 511k | R_0603_1608Metric | R402 |
| 1 | 162k | R_0603_1608Metric | R403 |
| 3 | 499k 1% | R_0603_1608Metric | R404, R407, R410 |
| 1 | 200k 1% | R_0603_1608Metric | R405 |
| 3 | 162k 1% | R_0603_1608Metric | R406, R409, R412 |
| 1 | 143k 1% | R_0603_1608Metric | R408 |
| 1 | 40.2 1% | R_0603_1608Metric | R411 |
| 1 | 89 1% | R_0603_1608Metric | R502 |
| 1 | 47k | R_0603_1608Metric | R503 |
USIC design files
The KiCad project lives in the dabridgham/USIC repository on GitHub; these links point at the commit this page was built from.
- Layoutusic.kicad_pcb
- Schematicusic.kicad_sch
USIC: common questions
What microcontroller does the USIC use?
The USIC is built around the XC7A75T-CSG324, from the FPGA family.
How big is the USIC PCB?
The USIC measures 214.1 × 265.6 mm, has 6 copper layers and is 1.6 mm thick.
How many components are on the USIC?
245 components, from 61 distinct parts. The full bill of materials is listed on this page.
Where can I download the USIC design files?
From the dabridgham/USIC repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the USIC design in my own project?
The repository has no license, so all rights stay with dabridgham. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the USIC without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug FPGA firmware against it before you order a PCB.
Similar boards
FPGA
Base board
GlasgowEmbedded
80 × 49 mm222 parts4L0BSD2.2kFPGA
Thunderscope Rev5.3
EEVengers
122.5 × 103.5 mm817 parts6LMIT1.3kFPGA
Usb sniffer
ataradov
58.2 × 38.1 mm86 parts2LBSD-3-Clause1.3kFPGA
Tomu, I'm
theacodes
13 × 9.4 mm40 parts4LMIT1.1kFPGA
Icepi zero
cheyao
65 × 30 mm143 parts4LSHL-2.1865FPGA
Gcvideo
ikorb
49 × 30 mm44 parts4LNo license765