8 open source boards using the NJM2845DL1-33-TE1

Real designs built with the NJM2845DL1-33-TE1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

8 boardsClear filters|Most starred

The NJM2845DL1-33-TE1 in open source designs

The gallery holds 8 open source boards using the NJM2845DL1-33-TE1 from 3 GitHub repositories; a typical one measures about 39.6 × 75.1 mm and carries around 30 components.

100% are two-layer designs, the rest use four layers or more, and 25% carry an open source license.

The most starred is ESP32 BLEKeyBoard by KK153402.

Parts used alongside the NJM2845DL1-33-TE1

Microcontrollers on boards using the NJM2845DL1-33-TE1

What boards using the NJM2845DL1-33-TE1 are built for

NJM2845DL1-33-TE1: common questions

Where can I find a NJM2845DL1-33-TE1 reference design?

Each of the 8 boards on this page is a real design using the NJM2845DL1-33-TE1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the NJM2845DL1-33-TE1 use?

Most are built on STM32 (5) and ESP32 (3).

How big is a typical board using the NJM2845DL1-33-TE1?

The median is 39.6 × 75.1 mm, and 100% are two-layer designs.

What is the most popular open source board using the NJM2845DL1-33-TE1?

By GitHub stars, ESP32 BLEKeyBoard by KK153402, with 0 stars.

Can I simulate one of these boards using the NJM2845DL1-33-TE1 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part