Bp5-ir toy v3-rev3
DangerousPrototypes·BusPirate5-hardware·adapter-ir-toy-3REV3/bp5-ir-toy-v3-rev3.kicad_pcb
About the Bp5-ir toy v3-rev3 PCB
Bp5-ir toy v3-rev3 is an open source PCB design by DangerousPrototypes, published on GitHub under the MIT license. It is a 2-layer board measuring 23.8 × 38.5 mm, with 34 components from 28 distinct parts.
Other key parts include the OS1200MW-A1, IRM-3638J7, QSE159, CHQ0038L-56kHz and AiP74LVC1T45GC363.TR. By type, the board carries 13 resistors, 8 capacitors, 5 ICs, 5 diodes, 2 connectors and 1 transistor.
It belongs with the displays & leds, power & battery and test & measurement designs in this gallery.
From the project
Bus Pirate Hardware and accessories for v5 and higher
Bus Pirate 5 is the latest edition of the universal serial interface trusted by hackers since 2008.
Can't get a chip to work? Is it the circuit, code, bad part or a burned out pin? The Bus Pirate sends commands over common serial protocols (1-Wire, I2C, SPI, UART, MIDI, serial LEDs, etc) so you can get to know a chip before prototyping. Updated with tons of new features, talking to chips and probing interfaces is more fun than ever!

Main components on the Bp5-ir toy v3-rev3
Bp5-ir toy v3-rev3 bill of materials (BOM)
34 components, 28 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | OS1200MW-A1 | TSOP18XX | U1 |
| 1 | IRM-3638J7 | TSOP18XX | U2 |
| 1 | QSE159 IRM-3638T | TSOP18XX | U3 |
| 1 | CHQ0038L-56kHz | TSOP18XX | U4 |
| 1 | AiP74LVC1T45GC363.TR | SOT-363_SC-70-6 | U5 |
| 1 | BC818/S8050 MMBT4401LT1G | SOT-23 | Q3 |
| 1 | CONN_01X10 Conn_01x10 | PinSocket_1x10_P2.54mm_Horizontal | J1 |
| 1 | Conn_02x03_1.27mm | PinHeader_2x03_P1.27mm_Vertical | J3 |
| 1 | LED | LED_0805_2012Metric | D1 |
| 1 | BAS16J/1N4148 TSAL6100 | LED_D5.0mm_Horizontal_O1.27mm_Z3.0mm_IRGrey | D3 |
| 1 | BAS16J/1N4148 TSAL6200 | LED_D5.0mm_Horizontal_O1.27mm_Z3.0mm_IRGrey | D4 |
| 1 | BAS16J/1N4148 1N4148WS | D_SOD-323F | D9 |
| 1 | VSLB3940 1N4148WS | D_SOD-323F | D10 |
| 3 | 4.7UF 4.7uF | C_0805_2012Metric | C1, C2, C3 |
| 2 | 0.22UF 4.7uF | C_0805_2012Metric | C4, C5 |
| 1 | 100uF | CP_EIA-3528-21_Kemet-B_Pad1.50x2.35mm_HandSolder | C6 |
| 2 | 0.1uF | C_0805_2012Metric | C7, C8 |
| 1 | 100R | R_0805_2012Metric | R1 |
| 2 | 6R8 10K | R_0805_2012Metric | R2, R9 |
| 1 | 3K6 330R | R_0805_2012Metric | R3 |
Show 8 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 3K6 100R | R_0805_2012Metric | R4, R8 |
| 1 | 390R 10K | R_0805_2012Metric | R5 |
| 1 | 390R 1R2 | R_1206_3216Metric | R6 |
| 1 | 6R8 100R | R_0805_2012Metric | R7 |
| 1 | 2K | R_0805_2012Metric | R10 |
| 1 | 3R0 | R_1206_3216Metric | R11 |
| 1 | 20K | R_0805_2012Metric | R12 |
| 1 | 6R8 | R_1206_3216Metric | R13 |
Bp5-ir toy v3-rev3 design files
The KiCad project lives in the DangerousPrototypes/BusPirate5-hardware repository on GitHub; these links point at the commit this page was built from.
Bp5-ir toy v3-rev3: common questions
How big is the Bp5-ir toy v3-rev3 PCB?
The Bp5-ir toy v3-rev3 measures 23.8 × 38.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Bp5-ir toy v3-rev3?
34 components, from 28 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Bp5-ir toy v3-rev3 design files?
From the DangerousPrototypes/BusPirate5-hardware repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Bp5-ir toy v3-rev3 design in my own project?
Yes, under the terms of its MIT license, which DangerousPrototypes chose for the repository.
More boards in BusPirate5-hardware
RP2040/RP2350
BusPirate-5-rev10
DangerousPrototypes
60.5 × 60 mm210 parts4LMIT124Vpp maker rev6-ian
DangerousPrototypes
26.5 × 36 mm23 parts2LMIT124Adapter ram ddr5-1REV2
DangerousPrototypes
26 × 154.5 mm20 parts2LMIT124Rs232-dual adapter
DangerousPrototypes
40 × 51 mm16 parts2LMIT124Sim rev3c
DangerousPrototypes
40.1 × 58.4 mm12 parts2LMIT124Stemma qwiic grove gravity bog plank-1REV1
DangerousPrototypes
39.5 × 51 mm12 parts2LMIT124Flash wson rev3
DangerousPrototypes
22.5 × 37.8 mm10 parts2LMIT124Flash sop lotes rev3
DangerousPrototypes
22.5 × 37.8 mm10 parts2LMIT124Flash zif rev3
DangerousPrototypes
31.3 × 42 mm8 parts2LMIT124Flash sop rev4
DangerousPrototypes
42.8 × 42 mm7 parts2LMIT124Blank plank rev0b
DangerousPrototypes
44.8 × 51 mm3 parts2LMIT124
Similar boards
View base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kBM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kStackLink
gusmanb
52.3 × 10.5 mm5 parts2LGPL-3.05.0kLevelShifter
gusmanb
28.3 × 39.8 mm21 parts2LGPL-3.05.0k