Vpp maker rev6-ian

DangerousPrototypes·BusPirate5-hardware·adapter-vpp-maker-1REV6/vpp-maker-rev6-ian.kicad_pcb

Vpp maker rev6-ian PCB layout, top view — open source board by DangerousPrototypes

About the Vpp maker rev6-ian PCB

Vpp maker rev6-ian is an open source PCB design by DangerousPrototypes, published on GitHub under the MIT license. It is a 2-layer board measuring 26.5 × 36 mm, with 23 components from 19 distinct parts.

By type, the board carries 8 resistors, 4 transistors, 4 diodes, 3 connectors, 3 capacitors and 1 inductor.

It belongs with the displays & leds, power & battery and test & measurement designs in this gallery.

From the project

Bus Pirate Hardware and accessories for v5 and higher

Bus Pirate 5 is the latest edition of the universal serial interface trusted by hackers since 2008.

Can't get a chip to work? Is it the circuit, code, bad part or a burned out pin? The Bus Pirate sends commands over common serial protocols (1-Wire, I2C, SPI, UART, MIDI, serial LEDs, etc) so you can get to know a chip before prototyping. Updated with tons of new features, talking to chips and probing interfaces is more fun than ever!

Vpp maker rev6-ian, from the project README
From the project README

Vpp maker rev6-ian bill of materials (BOM)

23 components, 19 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
MMBT3906
Q1
3
MMBT3904
Q2, Q3, Q4
1
CONN_01X10
Conn_01x10
J1
1
CONN_01X10
Conn_01x10
J2
1
CONN_01X08
Conn_01x08
J4
1
LED
D1
1
BAT54W
D2
1
18V
D3
1
4.7V
D4
1
YP0403/YP0504-681M
680uH
L1
1
0.1UF
0.1uF
C13
1
10UF/16V/CASE-A
10uF/16V/CASE-A
C14
1
47UF/25V/CASE-D
47uF/25V/CASE-D
C15
1
2K
R1
1
10K
R22
1
100K
R23
1
2.7K
2K
R24
3
10K
R25, R27, R29
1
100R
R28

Vpp maker rev6-ian design files

The KiCad project lives in the DangerousPrototypes/BusPirate5-hardware repository on GitHub; these links point at the commit this page was built from.

Vpp maker rev6-ian: common questions

How big is the Vpp maker rev6-ian PCB?

The Vpp maker rev6-ian measures 26.5 × 36 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Vpp maker rev6-ian?

23 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Vpp maker rev6-ian design files?

From the DangerousPrototypes/BusPirate5-hardware repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Vpp maker rev6-ian design in my own project?

Yes, under the terms of its MIT license, which DangerousPrototypes chose for the repository.

More boards in BusPirate5-hardware

Similar boards