Adapter ram ddr5-1REV2
DangerousPrototypes·BusPirate5-hardware·adapter-ram-ddr5-1REV2/adapter-ram-ddr5-1REV2.kicad_pcb
About the Adapter ram ddr5-1REV2 PCB
Adapter ram ddr5-1REV2 is an open source PCB design by DangerousPrototypes, published on GitHub under the MIT license. It is a 2-layer board measuring 26 × 154.5 mm, with 20 components from 13 distinct parts.
Other key parts include the TXS0102DCU and ME6206A33XG. By type, the board carries 7 resistors, 4 capacitors, 3 connectors, 2 ICs, 2 transistors and 2 diodes.
It belongs with the displays & leds, power & battery and test & measurement designs in this gallery.
From the project
Bus Pirate Hardware and accessories for v5 and higher
Bus Pirate 5 is the latest edition of the universal serial interface trusted by hackers since 2008.
Can't get a chip to work? Is it the circuit, code, bad part or a burned out pin? The Bus Pirate sends commands over common serial protocols (1-Wire, I2C, SPI, UART, MIDI, serial LEDs, etc) so you can get to know a chip before prototyping. Updated with tons of new features, talking to chips and probing interfaces is more fun than ever!

Main components on the Adapter ram ddr5-1REV2
Adapter ram ddr5-1REV2 bill of materials (BOM)
20 components, 13 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TXS0102DCU | VSSOP-8_2.3x2mm_P0.5mm | U1 |
| 1 | ME6206A33XG | SOT-23 | U2 |
| 1 | BC807 | SOT-23 | Q5 |
| 1 | BC817 | SOT-23 | Q6 |
| 1 | DDR504111002KQ | DDR5 UDIMM GENERIC | J1 |
| 1 | CONN_01X10 Conn_01x10 | PinSocket_1x10_P2.54mm_Horizontal | J2 |
| 1 | 10160554-001SHLF | AMPHENOL_10160554-001SHLF | J4 |
| 2 | LED | LED_0805_2012Metric | D2, D3 |
| 4 | 10UF/6.3V 10uF/6.3V | C_0805_2012Metric | C4, C5, C6, C7 |
| 3 | 6.8K | R_0805_2012Metric | R2, R12, R13 |
| 2 | 1K | R_0805_2012Metric | R8, R9 |
| 1 | 680R | R_0805_2012Metric | R10 |
| 1 | 330R | R_0805_2012Metric | R11 |
Adapter ram ddr5-1REV2 design files
The KiCad project lives in the DangerousPrototypes/BusPirate5-hardware repository on GitHub; these links point at the commit this page was built from.
Adapter ram ddr5-1REV2: common questions
How big is the Adapter ram ddr5-1REV2 PCB?
The Adapter ram ddr5-1REV2 measures 26 × 154.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Adapter ram ddr5-1REV2?
20 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Adapter ram ddr5-1REV2 design files?
From the DangerousPrototypes/BusPirate5-hardware repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Adapter ram ddr5-1REV2 design in my own project?
Yes, under the terms of its MIT license, which DangerousPrototypes chose for the repository.
More boards in BusPirate5-hardware
RP2040/RP2350
BusPirate-5-rev10
DangerousPrototypes
60.5 × 60 mm210 parts4LMIT124Bp5-ir toy v3-rev3
DangerousPrototypes
23.8 × 38.5 mm34 parts2LMIT124Vpp maker rev6-ian
DangerousPrototypes
26.5 × 36 mm23 parts2LMIT124Rs232-dual adapter
DangerousPrototypes
40 × 51 mm16 parts2LMIT124Stemma qwiic grove gravity bog plank-1REV1
DangerousPrototypes
39.5 × 51 mm12 parts2LMIT124Sim rev3c
DangerousPrototypes
40.1 × 58.4 mm12 parts2LMIT124Flash sop lotes rev3
DangerousPrototypes
22.5 × 37.8 mm10 parts2LMIT124Flash wson rev3
DangerousPrototypes
22.5 × 37.8 mm10 parts2LMIT124Flash zif rev3
DangerousPrototypes
31.3 × 42 mm8 parts2LMIT124Flash sop rev4
DangerousPrototypes
42.8 × 42 mm7 parts2LMIT124Blank plank rev0b
DangerousPrototypes
44.8 × 51 mm3 parts2LMIT124
Similar boards
View base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kBM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kStackLink
gusmanb
52.3 × 10.5 mm5 parts2LGPL-3.05.0kLevelShifter
gusmanb
28.3 × 39.8 mm21 parts2LGPL-3.05.0k