Pi HAT Simple V3
About the Pi HAT Simple V3
Pi HAT Simple V3 is an open source PCB design by danielwilczak101, published on GitHub. It is a 2-layer board measuring 68.8 × 71.3 mm, with 11 components from 10 distinct parts.
Other key parts include the LM2596S and MCP3008-I/SL. By type, the board carries 7 connectors, 2 ICs and 2 resistors.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Originally part of the NASA Asteroid flyer program has been repurposed by the EPPL to allow anyone interested in controls to go online and connect with a real working device and test their own control algorithms on a live device that is connected to the global internet.
Originally part of the NASA Asteroid flyer program has been repurposed by the EPPL to allow anyone interested in controls to go online and connect with a real working device and test their own control algorithms on a live device that is connected to the global internet. The spacecraft has been refitted with new and improved wiring, updated computers and a website that allows for members to connect and upload code to.
Main components on the Pi HAT Simple V3
Pi HAT Simple V3 bill of materials (BOM)
11 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM2596S | LM2596S_mod | U1 |
| 1 | MCP3008-I/SL | SOIC127P600X175-16N | U2 |
| 1 | MPU 6050 | PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | Pi_GPIO | PinHeader_2x20_P2.54mm_Vertical | J2 |
| 1 | Display | PinHeader_2x03_P2.54mm_Vertical | J3 |
| 1 | INPUT-XT60 | AMASS_XT60PW-M | J4 |
| 1 | Pressure Sensor | PinHeader_1x03_P2.54mm_Vertical | J5 |
| 2 | Conn_01x04_Male | PinHeader_1x04_P2.54mm_Vertical | J8, J9 |
| 1 | 2k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
Pi HAT Simple V3 design files
The KiCad project lives in the danielwilczak101/EasyControls repository on GitHub; these links point at the commit this page was built from.
Pi HAT Simple V3: common questions
How big is the Pi HAT Simple V3?
The Pi HAT Simple V3 measures 68.8 × 71.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Pi HAT Simple V3?
11 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the Pi HAT Simple V3 design files?
From the danielwilczak101/EasyControls repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Pi HAT Simple V3 design in my own project?
The repository has no license, so all rights stay with danielwilczak101. Use it as a reference, and ask the author before reusing the design.
More boards in EasyControls
AVR/ArduinoSpacecraft ATmega328 MOSFET
38.6 × 31 mm26 parts2LNo license4
Pi HAT V4
71.7 × 71.3 mm24 parts2LNo license4
AVR/ArduinoFree Flier
40.9 × 28.7 mm19 parts2LNo license4
AVR/ArduinoNANO HAT
51.6 × 59.1 mm16 parts2LNo license4
MJBOTS-CubeSat
88.1 × 82.7 mm15 parts2LNo license4
AVR/ArduinoPi HAT V4 Simple
78.1 × 71.3 mm8 parts2LNo license4
Pi HAT V5 Simple
78.1 × 71.3 mm8 parts2LNo license4
CubeSat
88 × 73 mm5 parts2LNo license4
Similar boards
88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k
134pin 7-967288-1
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
Rj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979