Pi HAT V4 Simple
About the Pi HAT V4 Simple
Pi HAT V4 Simple is an open source AVR/Arduino PCB design by danielwilczak101, published on GitHub. It is a 2-layer board measuring 78.1 × 71.3 mm, with 8 components from 8 distinct parts.
Its main chip is the ARDUINO_NANO, from the AVR/Arduino family. Other key parts include the LM2596S. By type, the board carries 5 connectors, 1 IC and 1 switch.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Originally part of the NASA Asteroid flyer program has been repurposed by the EPPL to allow anyone interested in controls to go online and connect with a real working device and test their own control algorithms on a live device that is connected to the global internet.
Originally part of the NASA Asteroid flyer program has been repurposed by the EPPL to allow anyone interested in controls to go online and connect with a real working device and test their own control algorithms on a live device that is connected to the global internet. The spacecraft has been refitted with new and improved wiring, updated computers and a website that allows for members to connect and upload code to.
Main components on the Pi HAT V4 Simple
Pi HAT V4 Simple bill of materials (BOM)
8 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM2596S | LM2596S_mod | U1 |
| 1 | MPU 9250 | PinHeader_1x10_P2.54mm_Vertical | J1 |
| 1 | Pi_GPIO | PinHeader_2x20_P2.54mm_Vertical | J2 |
| 1 | Display | PinHeader_2x03_P2.54mm_Vertical | J3 |
| 1 | XT60PW-M | AMASS_XT60PW-M | J5 |
| 1 | Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | J7 |
| 1 | 2MS6T4B3M2CES | 2MS6T4B3M2CES | S1 |
| 1 | ARDUINO_NANO | SHIELD_ARDUINO_NANO | TB1 |
Pi HAT V4 Simple design files
The KiCad project lives in the danielwilczak101/EasyControls repository on GitHub; these links point at the commit this page was built from.
Pi HAT V4 Simple: common questions
What microcontroller does the Pi HAT V4 Simple use?
The Pi HAT V4 Simple is built around the ARDUINO_NANO, from the AVR/Arduino family.
How big is the Pi HAT V4 Simple?
The Pi HAT V4 Simple measures 78.1 × 71.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Pi HAT V4 Simple?
8 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the Pi HAT V4 Simple design files?
From the danielwilczak101/EasyControls repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Pi HAT V4 Simple design in my own project?
The repository has no license, so all rights stay with danielwilczak101. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Pi HAT V4 Simple without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in EasyControls
AVR/ArduinoSpacecraft ATmega328 MOSFET
38.6 × 31 mm26 parts2LNo license4
Pi HAT V4
71.7 × 71.3 mm24 parts2LNo license4
AVR/ArduinoFree Flier
40.9 × 28.7 mm19 parts2LNo license4
AVR/ArduinoNANO HAT
51.6 × 59.1 mm16 parts2LNo license4
MJBOTS-CubeSat
88.1 × 82.7 mm15 parts2LNo license4
Pi HAT Simple V3
68.8 × 71.3 mm11 parts2LNo license4
Pi HAT V5 Simple
78.1 × 71.3 mm8 parts2LNo license4
CubeSat
88 × 73 mm5 parts2LNo license4
Similar boards
AVR/ArduinoRedox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0k
AVR/ArduinoModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoV4
30 × 50 mm38 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoDiscipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k
AVR/ArduinoMegadesk
gcormier
41.7 × 32.2 mm23 parts2LGPL-3.0818
AVR/ArduinoEasyduino Atmega Nano
Hanqaqa
43.4 × 18 mm30 parts4LCERN-OHL-P-2.0746