46 open source boards using the 74HC139

Real designs built with the 74HC139, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

46 boardsClear filters|Most starred

How designs wire the 74HC139

Read from the KiCad layouts of 29 open source designs, one per repository: what each pin of the 74HC139 connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 25 of 29 designs, most often 100 nF (then 4.7 µF).
  • The O2 pins is left unconnected on 60% of them (a signal on 23).
O2pin 6, 10Connected to: Not connected 60% · a signal 40%
GNDpin 8Connected to: GND 100%
VCCpin 16Connected to: VCC 97%
  • Decoupling capacitor on 86% · 100 nF (23), 4.7 µF (1), 1 µF (1)

6 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include OpenTendo by Redherring32, K30 SBC by transistorfet, .C68 by ProbablyNotArtyom and HVC-CPU-07 by starlightk7.

The 74HC139 in open source designs

The gallery holds 46 open source boards using the 74HC139 from 29 GitHub repositories; a typical one measures about 160 × 100 mm and carries around 93 components.

78% are two-layer designs, the rest use four layers or more, and 54% carry an open source license.

The most starred is OpenTendo by Redherring32.

Microcontrollers on boards using the 74HC139

74HC139: common questions

Where can I find a 74HC139 reference design?

Each of the 46 boards on this page is a real design using the 74HC139. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the 74HC139 VCC pin?

The VCC pin has a decoupling capacitor on 25 of 29 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 29 open source designs using the 74HC139.

How is the 74HC139 O2 pin connected?

The O2 pins is left unconnected on 60% of them (a signal on 23). Counted from the KiCad layouts of 29 open source designs using the 74HC139.

What parts are used alongside the 74HC139?

The 74HC14, 74HC32, 74HC138, 28C256 and 74HC273 appear in the most repositories here.

Which microcontrollers do boards using the 74HC139 use?

Most are built on AVR/Arduino (2), PIC (2), ESP8266 (1) and RP2040/RP2350 (1).

How big is a typical board using the 74HC139?

The median is 160 × 100 mm, and 78% are two-layer designs.

What is the most popular open source board using the 74HC139?

By GitHub stars, OpenTendo by Redherring32, with 859 stars.

Can I simulate one of these boards using the 74HC139 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part