Boreas

darshg321·Boreas·pcb/Boreas.kicad_pcb

Boreas PCB layout, top view — open source STM32 board by darshg321

About the Boreas PCB

Boreas is an open source STM32 PCB design by darshg321, published on GitHub. It is a 2-layer board measuring 50 × 50 mm, with 92 components from 40 distinct parts.

Its main chip is the STM32F722RETX, from the STM32 family. Other key parts include the BMP580, BQ25883RGER, ICM-45686, LMR51430 and QMC5883P. By type, the board carries 43 capacitors, 23 resistors, 7 ICs, 5 connectors, 4 switches and 4 inductors.

It belongs with the robotics & motion, power & battery and sensors designs in this gallery.

From the project

an STM32F7 flight controller for a rocket.

made this project to both learn how to make flight controllers in general for my drone. making it i got some more practice in routing pcbs and how to read datasheets! the plan for this board is to be used in a rocket im going to make, where hopefully with the gyro and motor pins i can get it to 1km altitude or higher. little ambitious for my first rocket project but i tihnk it should be fine! for its kind of a big pcb so it'll be hard to fit on the rocket but itll work fine i think. also the sd card will be useful to gain cool telemetry, and i plan to use it to generate interesting graphs…

Boreas, from the project README
From the project README

Main components on the Boreas

Boreas bill of materials (BOM)

92 components, 40 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
BMP580
Bosch(博世)
U1
1
BQ25883RGER
TI(德州仪器)
U2
1
ICM-45686
TDK InvenSense(应美盛)
U3
1
STM32F722RETX
STM32F722RETx
U5
1
LMR51430
U6
1
QMC5883P
QST(上海矽睿)
U7
1
TPS630701RNMR
TI(德州仪器)
U8
1
X322525MOB4SI
YXC(扬兴晶振)
X1
1
Q13FC13500004
Q13FC1350000400
EPSON(爱普生)
X2
1
USB_C_RECEPTACLE_USB2.0_16P
USB_C_Receptacle_USB2.0_16P
J1
1
SCREW_TERMINAL_01X02
Screw_Terminal_01x02
J2
3
CONN_01X03
Conn_01x03
J3, J4, J5
1
FUET-9018
FST-9018
FUET(福声科技)
BUZZER2
1
TF-01A
韩国韩荣
Card1
4
TS-1088-AR02016
XUNPU(讯普)
SW1, SW2, SW3, SW4
2
LED
D1, D2
1
XFL4020-152MEC
Coilcraft(线艺)
L1
1
YHNR3015-5R6M
YJYCOIN(益嘉源)
L2
1
FCM1608KF-601T03
TAI-TECH(台庆)
L4
1
DFE252012F-1R0M=P2
muRata(村田)
L5
Show 20 more
QtyPartRefs
4
1UF
1uF
C1, C30, C31, C32
8
10UF
10uF
C2, C4, C5, C7, C8, C9, C10, C33
2
22UF
22uF
C3, C43
1
47NF
47nF
C6
5
22UF
22uF
C11, C12, C14, C17, C18
15
0.1UF
0.1uF
C13, C16, C19, C20, C21, C22, C24, C25 +7
1
4.7UF
4.7uF
C15
1
2.2UF
2.2uF
C23
2
20PF
20pF
C34, C35
2
6.8PF
6.8pF
C36, C37
1
4.7UF
4.7uF
C39
1
1UF
1uF
C41
2
5.1K
R1, R2
1
383
R3
13
10K
R4, R7, R9, R10, R11, R12, R13, R14 +5
1
5.23K
R5
1
30.1K
R6
2
220
R8, R23
2
100K
R15, R16
1
22.1K
R17

Boreas design files

The KiCad project lives in the darshg321/Boreas repository on GitHub; these links point at the commit this page was built from.

Boreas: common questions

What microcontroller does the Boreas use?

The Boreas is built around the STM32F722RETX, from the STM32 family.

How big is the Boreas PCB?

The Boreas measures 50 × 50 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Boreas?

92 components, from 40 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Boreas design files?

From the darshg321/Boreas repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Boreas design in my own project?

The repository has no license, so all rights stay with darshg321. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Boreas without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards