7 open source boards using the TPS630701RNMR

Real designs built with the TPS630701RNMR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

How designs wire the TPS630701RNMR

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the TPS630701RNMR connects to, and the resistors, capacitors and other passives placed on it.

  • The VAUX pin has a capacitor to GND on 7 of 7 designs, most often 100 nF.
  • The L2 pin has a inductor on 7 of 7 designs, most often 1.5 µH (then 1 µH).
  • The L1 pin has a inductor on 7 of 7 designs, most often 1.5 µH (then 1 µH).
  • The PG pin has a pull-up to 5V on 6 of 7 designs, most often 100 kΩ (then 10 kΩ).
PS/SYNCpin 1Connected to: Signal 71% · GND 29%
  • Series resistor on 43% · 10 kΩ (3)
PGpin 2Connected to: Signal 86%
  • Pull-up to 5V on 86% · 100 kΩ (5), 10 kΩ (1)
VAUXpin 3Connected to: Signal 100%
  • Capacitor to GND on 100% · 100 nF (6)
GNDpin 4Connected to: GND 100%
FBpin 5Connected to: 5V 71% · a signal 29%
FB2pin 6Connected to: GND 100%
VOUTpin 7, 8Connected to: 5V 86%
  • Decoupling capacitor on 86% · 22 µF (17), 10 µF (4)
L2pin 9Connected to: Signal 100%
  • Inductor on 100% · 1.5 µH (3), 1 µH (1)
PGNDpin 10Connected to: GND 100%
L1pin 11Connected to: Signal 100%
  • Inductor on 100% · 1.5 µH (3), 1 µH (1)
VINpin 12, 13Connected to: Signal 57% · VSYS_RAW 43%
  • Capacitor to GND on 71% · 10 µF (24), 68 µF (4), 4.7 µF (4)
  • Series resistor on 57% · 10 kΩ (8), 270 Ω (2), 150 kΩ (2)
ENpin 14Connected to: Signal 100%
  • Series resistor on 57% · 10 kΩ (4), 270 Ω (1)
VSELpin 15Connected to: GND 100%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Open race v2 by teehee567, Preamp by bengineer91, E badge by BYU-I-eBadge and Sol-Mk.-I by HIIACODER.

The TPS630701RNMR in open source designs

The gallery holds 7 open source boards using the TPS630701RNMR from 7 GitHub repositories; a typical one measures about 86.5 × 50 mm and carries around 92 components.

57% use four copper layers or more, and 43% carry an open source license.

The most starred is Open race v2 by teehee567.

Parts used alongside the TPS630701RNMR

Microcontrollers on boards using the TPS630701RNMR

TPS630701RNMR: common questions

Where can I find a TPS630701RNMR reference design?

Each of the 7 boards on this page is a real design using the TPS630701RNMR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the TPS630701RNMR VAUX pin connected?

The VAUX pin has a capacitor to GND on 7 of 7 designs, most often 100 nF. Counted from the KiCad layouts of 7 open source designs using the TPS630701RNMR.

How is the TPS630701RNMR L2 pin connected?

The L2 pin has a inductor on 7 of 7 designs, most often 1.5 µH (then 1 µH). Counted from the KiCad layouts of 7 open source designs using the TPS630701RNMR.

How is the TPS630701RNMR L1 pin connected?

The L1 pin has a inductor on 7 of 7 designs, most often 1.5 µH (then 1 µH). Counted from the KiCad layouts of 7 open source designs using the TPS630701RNMR.

What parts are used alongside the TPS630701RNMR?

The BQ25883RGER, ICM-45686 and USBLC6-2SC6 appear in the most repositories here.

Which microcontrollers do boards using the TPS630701RNMR use?

Most are built on ESP32 (3), Raspberry Pi (1), RP2040/RP2350 (1) and STM32 (1).

How big is a typical board using the TPS630701RNMR?

The median is 86.5 × 50 mm, and 43% are two-layer designs.

What is the most popular open source board using the TPS630701RNMR?

By GitHub stars, Open race v2 by teehee567, with 4 stars.

Can I simulate one of these boards using the TPS630701RNMR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part