Sensor puck
david072·sensor_puck·pcb/sensor_puck.kicad_pcb
About the Sensor puck PCB
Sensor puck is an open source ESP32 PCB design by david072, published on GitHub. It is a 2-layer board measuring 42.2 × 41.9 mm, with 49 components from 26 distinct parts.
Its main chip is the ESP32-S3-MINI-1U, from the ESP32 family. Other key parts include the ST25DV16K-IER8C3, LSM6DSOXTR, SGP41-D-R4, RT9013 and LIS2MDL. By type, the board carries 17 capacitors, 15 resistors, 7 ICs, 4 connectors, 2 switches and 1 transistor.
It belongs with the sensors designs in this gallery.
Main components on the Sensor puck
Sensor puck bill of materials (BOM)
49 components, 26 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-MINI-1U | ESP32-S2-MINI-1U | U1 |
| 1 | ST25DV16K-IER8C3 | DFN-8-1EP_3x2mm_P0.5mm_EP1.36x1.46mm | U2 |
| 1 | LSM6DSOXTR | LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4y | U3 |
| 1 | SGP41-D-R4 | XDCR_SGP41-D-R4 | U4 |
| 1 | RT9013 | SOT-23-5 | U5 |
| 1 | LIS2MDL | LGA-12_2x2mm_P0.5mm | U7 |
| 1 | SCD41-D-R2 | Sensirion_SCD4x-1EP_10.1x10.1mm_P1.25mm_EP4.8x4.8mm | U8 |
| 1 | 2N7002 | SOT-23 | Q1 |
| 1 | DISP LEFT | PinHeader_1x07_P2.54mm_Vertical | J1 |
| 1 | DISP RIGHT | PinHeader_1x07_P2.54mm_Vertical | J2 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J3 |
| 1 | Conn_01x02_Socket | PinHeader_1x02_P2.00mm_Vertical | J6 |
| 1 | Buzzer | CMT-7525-80-SMT-TR | BZ1 |
| 1 | RST | SW_Push_1P1T_NO_CK_KMR2 | SW1 |
| 1 | BOOT | SW_Push_1P1T_NO_CK_KMR2 | SW2 |
| 1 | D | D_0805_2012Metric | D1 |
| 1 | TBD | PinHeader_1x02_P2.54mm_Vertical | L1 |
| 9 | 100nF | C_0805_2012Metric | C1, C6, C8, C9, C12, C13, C18, C19 +1 |
| 2 | 1uF/X7R | C_0805_2012Metric | C2, C3 |
| 2 | 1uF | C_0805_2012Metric | C4, C5 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 4.7uF | C_0805_2012Metric | C7 |
| 2 | 10nF | C_0805_2012Metric | C10, C21 |
| 1 | 220nF | C_0805_2012Metric | C17 |
| 11 | 10k | R_0805_2012Metric | R1, R2, R3, R4, R7, R8, R10, R12 +3 |
| 3 | 5k11 | R_0805_2012Metric | R5, R6, R11 |
| 1 | 4R7 | R_0805_2012Metric | R9 |
Sensor puck design files
The KiCad project lives in the david072/sensor_puck repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/sensor_puck.kicad_pcb
- Schematicpcb/sensor_puck.kicad_sch
Sensor puck: common questions
What microcontroller does the Sensor puck use?
The Sensor puck is built around the ESP32-S3-MINI-1U, from the ESP32 family.
How big is the Sensor puck PCB?
The Sensor puck measures 42.2 × 41.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Sensor puck?
49 components, from 26 distinct parts. The full bill of materials is listed on this page.
Where can I download the Sensor puck design files?
From the david072/sensor_puck repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Sensor puck design in my own project?
The repository has no license, so all rights stay with david072. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Sensor puck without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k