Macropad
dbozec·macropad·ECAD/macroPad.kicad_pcb
About the Macropad PCB
Macropad is an open source ESP32 PCB design by dbozec, published on GitHub. It is a 2-layer board measuring 112 × 79 mm, with 75 components from 28 distinct parts.
Its main chip is the ESP32-WROOM-32, from the ESP32 family. Other key parts include the CH340C, AP2112K-3.3 and MCP73831. By type, the board carries 19 switches, 19 diodes, 16 resistors, 10 capacitors, 4 ICs and 4 transistors.
It belongs with the keyboards and iot & wireless designs in this gallery.
From the project
Custom wireless macropad
This is a custom macropad with 4x4 keys and a rotary knob.
I wanted it to be wireless so it is built arround an ESP32 module with Bluetooth.
It is built to be used with Kailh Choc keyswitches to have a lower profile than classical mechanical switches.
Shortly after I started to work on this project, the folks from DeepSea-Developments announced their own work on the DeepDeck macropad. So I benefit from their work to design my own macropad.

Main components on the Macropad
Macropad bill of materials (BOM)
75 components, 28 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CH340C | SOIC-16_3.9x9.9mm_P1.27mm | U1 |
| 1 | AP2112K-3.3 | SOT-23-5 | U2 |
| 1 | ESP32-WROOM-32 | ESP32-WROOM-32 | U3 |
| 1 | MCP73831 | SOT-23-5 | U4 |
| 2 | DMG2307L | SOT-23 | Q1, Q4 |
| 2 | BC817 | SOT-23 | Q2, Q3 |
| 1 | Batt | JST_EH_S2B-EH_1x02_P2.50mm_Horizontal | J2 |
| 1 | I²C | PinSocket_1x04_P2.54mm_Vertical | J3 |
| 16 | Keyswitch | PG1350_optional-socket | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +8 |
| 1 | RotaryEncoder_Switch | RotaryEncoder_Bourns_PEC11S-929K-Switch_Vertical | SW17 |
| 1 | On-Off | SW_SPDT_Slide_Mini_Wurth_450404015514 | SW18 |
| 1 | Reset | SW_Tact_5x5mm_Wurth_431183015816 | SW19 |
| 16 | MMSD4148 | D_SOD-123 | D1, D2, D3, D4, D5, D6, D7, D8 +8 |
| 1 | 1A/23V/620mV | D_SOD-523 | D18 |
| 1 | Charging | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D19 |
| 1 | Blue | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D20 |
| 1 | FerriteBead | L_0805_2012Metric_Pad1.05x1.20mm_HandSolder | FB1 |
| 5 | 100nF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3, C9, C10 |
| 2 | 1µF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C5 |
| 1 | 10µF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6 |
Show 8 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 4.7µF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7, C8 |
| 2 | 5.1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
| 2 | 330 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R12 |
| 5 | 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R5, R9, R10, R11 |
| 3 | 100k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R13, R14 |
| 1 | 1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7 |
| 1 | 2k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8 |
| 2 | 3k3 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R15, R16 |
Macropad design files
The KiCad project lives in the dbozec/macropad repository on GitHub; these links point at the commit this page was built from.
- LayoutECAD/macroPad.kicad_pcb
- SchematicECAD/macroPad.kicad_sch
Macropad: common questions
What microcontroller does the Macropad use?
The Macropad is built around the ESP32-WROOM-32, from the ESP32 family.
How big is the Macropad PCB?
The Macropad measures 112 × 79 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Macropad?
75 components, from 28 distinct parts. The full bill of materials is listed on this page.
Where can I download the Macropad design files?
From the dbozec/macropad repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Macropad design in my own project?
The repository has no license, so all rights stay with dbozec. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Macropad without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k