6 open source boards using the DS1210
Real designs built with the DS1210, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Minimax8085
skiselev
100 × 80 mm44 parts2LGPL-3.060Zeta sbc
skiselev
170.2 × 100 mm74 partsGPL-3.051Mini8085
schenkmi
100 × 80 mm44 parts2LNo license2MaxRAM
fordp2002
76.2 × 43.2 mm15 parts2LGPL-2.02SST-6809-V2.2
KenWillmott
100 × 100 mm46 parts4LMIT1RC2014-RAM-ROM-NoBanking
dennisperry
104 × 69 mm38 parts2LNo license0
How designs wire the DS1210
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the DS1210 connects to, and the resistors, capacitors and other passives placed on it.
- The VCCO pin has a capacitor to GND on 5 of 6 designs, most often 100 nF.
- The TOL pin is tied to GND on 5 of 6 designs.
- The VBAT2 pin is tied to GND on 5 of 6 designs.
- The VCCI pin has a decoupling capacitor on 3 of 6 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VCCOpin 1 | Connected to: 62256 33% · VBAT 17% |
|
| VBAT1pin 2 | Connected to: VBAT 67% · a signal 33% | — |
| TOLpin 3 | Connected to: GND 83% · a signal 17% | — |
| GNDpin 4 | Connected to: GND 100% | — |
| VBAT2pin 7 | Connected to: GND 83% · VBAT2 17% | — |
| VCCIpin 8 | Connected to: VCC 100% |
|
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Minimax8085 by skiselev, Zeta sbc by skiselev, MaxRAM by fordp2002 and Mini8085 by schenkmi.
The DS1210 in open source designs
The gallery holds 6 open source boards using the DS1210 from 6 GitHub repositories; a typical one measures about 100 × 80 mm and carries around 44 components.
80% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.
The most starred is Minimax8085 by skiselev.
Parts used alongside the DS1210
What boards using the DS1210 are built for
DS1210: common questions
Where can I find a DS1210 reference design?
Each of the 6 boards on this page is a real design using the DS1210. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the DS1210 VCCO pin connected?
The VCCO pin has a capacitor to GND on 5 of 6 designs, most often 100 nF. Counted from the KiCad layouts of 6 open source designs using the DS1210.
How is the DS1210 TOL pin connected?
The TOL pin is tied to GND on 5 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the DS1210.
How is the DS1210 VBAT2 pin connected?
The VBAT2 pin is tied to GND on 5 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the DS1210.
What parts are used alongside the DS1210?
The 27C128, 62256, 74HC573, 80C85A and 82C51A appear in the most repositories here.
How big is a typical board using the DS1210?
The median is 100 × 80 mm, and 80% are two-layer designs.
What is the most popular open source board using the DS1210?
By GitHub stars, Minimax8085 by skiselev, with 60 stars.
Can I simulate one of these boards using the DS1210 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.