FLEADiP

dennowiggle·FLEADiP·kicad/FLEADiP.kicad_pcb

FLEADiP PCB layout, top view — open source board by dennowiggle

About the FLEADiP PCB

FLEADiP is an open source PCB design by dennowiggle, published on GitHub under the LGPL-2.1 license. It is a 4-layer board measuring 100 × 72 mm, with 189 components from 23 distinct parts.

Other key parts include the T20Q144C3, SN74LVC1G125DBVR, SN74LVC8T245DBR, TLV1117LV33DCYR and SN74LVC1G08DBVR. By type, the board carries 83 capacitors, 76 resistors, 18 ICs, 5 inductors, 4 transistors and 3 diodes.

It belongs with the retro computing and usb & debug tools designs in this gallery.

From the project

FLEADiP is a compatiable add-on board for the Z80 Retro! project

1. The 'output' directory contains the BOM, netlist, and PDF schematic.

3. The HDMI connector is on the bottom side of the board so that there is no P/N signal swap, at least for rev 0 PCB. This means the card doesn't fit right above the Z80 Retro! CPU board unless a spacer board is added or the HDMI connector is not installed. The board was designed with the intent to use the ESP32 programmer board underneath FLEADiP which does have space for the connector.

FLEADiP, from the project README
From the project README

Main components on the FLEADiP

FLEADiP bill of materials (BOM)

189 components, 23 distinct parts.

QtyPartRefs
1
T20Q144C3
U1
2
SN74LVC1G125DBVR
Texas Instruments
U201, U203
9
SN74LVC8T245DBR
Texas Instruments
U202, U204, U205, U206, U301, U302, U303, U801 +1
1
TLV1117LV33DCYR
Texas Instruments
U401
1
SN74LVC1G08DBVR
Texas Instruments
U501
1
W25Q32JVSSIQ
W25Q32JVSS
Winbond Electronics
U502
1
PTN3366BSMP
NXP
U701
2
RCLAMP0524P.TCT
RCLAMP0524P
Semtech Corporation
U702, U703
4
MMUN2211LT1G
ON Semiconductor
Q201, Q501, Q502, Q503
3
LTST-C191GKT
LTST-C191KRKT
Lite-On Inc.
D501, D502, D503
5
BLM18AG601SN1D
Murata Electronics North America
FB401, FB402, FB403, FB404, FB601
63
CC0603KRX7R7BB104
100nF
YAGEO
C201, C204, C205, C206, C208, C209, C211, C212 +55
20
CC0603KRX5R6BB106
10uF
Yaego
C202, C203, C207, C210, C215, C216, C307, C309 +12
53
RC0603JR-0710KL
10K
Yaego
R201, R202, R302, R303, R304, R305, R306, R307 +45
4
RC0603FR-071KL
1K
Yaego
R501, R502, R503, R516
2
RC0603FR-0733RL
33R
Yaego
R601, R705
2
RC0603FR-0712K4L
12K4
Yaego
R704, R706
1
RC1206JR-071ML
1M
YAGEO
R801
3
RC0603FR-074K02L
4K02
Yaego
R802, R806, R810
3
RC0603FR-072KL
2K00
Yaego
R803, R807, R811
Show 3 more
QtyPartRefs
3
RC0603FR-071KL
1K00
Yaego
R804, R808, R812
3
RC0603FR-07499RL
499R
Yaego
R805, R809, R813
2
RC0603FR-07100RL
100R
Yaego
R814, R815

FLEADiP design files

The KiCad project lives in the dennowiggle/FLEADiP repository on GitHub; these links point at the commit this page was built from.

FLEADiP: common questions

How big is the FLEADiP PCB?

The FLEADiP measures 100 × 72 mm, has 4 copper layers and is 1.60484 mm thick.

How many components are on the FLEADiP?

189 components, from 23 distinct parts. The full bill of materials is listed on this page.

Where can I download the FLEADiP design files?

From the dennowiggle/FLEADiP repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the FLEADiP design in my own project?

Yes, under the terms of its LGPL-2.1 license, which dennowiggle chose for the repository.

Similar boards