57 open source boards using the SN74LVC1G125DBVR
Real designs built with the SN74LVC1G125DBVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Aero-Hand-Open-Left
Chestnut-Robotics
40.8 × 43 mm23 parts2LCustom license1.1kPIC
RPI CMx Carrier
lecejeff
181.6 × 100.6 mm652 parts8LNo license26RP2040/RP2350
Rioctrl controller
festlv
190 × 100 mm260 parts4LCERN-OHL-S-2.016ESP32
Aero-Hand-Open-Left
ss1-ops
40.8 × 43 mm23 parts2LMIT6STM32
R2RDAC2026 REVIZE II
ERDALECE
246 × 120 mm919 parts6LGPL-3.05PIC
YukaLink
Misaka0x2730
94.3 × 81.8 mm235 parts4LGPL-3.03Gripper hat
nhnifong
65 × 30 mm52 parts4LNo license3Open-Source-PLC
gasiepgodoy
233.4 × 147.3 mm493 parts4LNo license2FLEADiP
dennowiggle
100 × 72 mm189 parts4LLGPL-2.12ESP32
URC
spikonado
110 × 90 mm150 parts4LCERN-OHL-W-2.02ESP32
Aero-Hand-Open-Left
Akatosh6DW
40.8 × 43 mm23 parts2LCustom license2ESP32
HolyGrail
whbCool
157 × 73 mm195 parts6LNo license1ESP32
Chainaxe
johnny9
100 × 70 mm109 parts4LCERN-OHL-S-2.01STM32
Chromapi motherboard
Mowibox
88.1 × 59.4 mm105 parts4LApache-2.01ESP32 Interface
dennowiggle
100 × 79 mm59 parts4LLGPL-2.11ESP32
Aero-Hand-Open-Left
UNR-RoboticsResearchLab
40.8 × 43 mm23 parts2LCustom license1After
DD1SB
180 × 140 mm287 parts2LMIT0ESP32
Custom round pcb led flash
xmyoot
84 × 84 mm224 parts4LNo license0RP2040/RP2350
SUB-00156 REV00
bcdevices
113.4 × 73 mm136 parts4LNo license0Quack core
HeyPCB
101 × 51.5 mm126 parts4LCERN-OHL-S-2.00Iris brainstem
HeyPCB
64 × 80 mm85 parts4LCERN-OHL-S-2.00Usb c one
fgihl
50 × 40 mm83 parts4LNo license0Unoq hat
Leif-Rydenfalk
68.6 × 53.3 mm77 parts4LApache-2.00ESP32
Feeder
aquarat
58.1 × 80 mm54 parts2LCustom license0STM32
Knuckle
HeyPCB
35 × 35 mm44 parts6LCERN-OHL-S-2.00ESP32
Aero-Hand-Open-Left
ParticleWorld-CalvinXing
40.8 × 43 mm23 parts2LCustom license0ESP32
Aero-Hand-Open-Left
what2004
40.8 × 43 mm23 parts2LCustom license0ESP32
Aero-Hand-Open-Left
yxmhello
40.8 × 43 mm23 parts2LCustom license0ESP32
Aero-Hand-Open-Left
Parmar-Krunal
40.8 × 43 mm23 parts2LNo license0ESP32
Aero-Hand-Open-Left
MrNanliu
40.8 × 43 mm23 parts2LMIT0ESP32
Aero-Hand-Open-Right
Chestnut-Robotics
40.8 × 43 mm23 parts2LCustom license1.1kSTM32
Uart-Sdi
ComNets-Bremen
51.4 × 25.5 mm12 parts2LGPL-3.013ESP32
Aero-Hand-Open-Right
ss1-ops
40.8 × 43 mm23 parts2LMIT6Raspberry Pi
Main pcb 2025
matthieuvigne
56 × 65.6 mm69 parts4LGPL-3.05ESP32
Aero-Hand-Open-Right
Akatosh6DW
40.8 × 43 mm23 parts2LCustom license2ESP32
Aero-Hand-Open-Right
UNR-RoboticsResearchLab
40.8 × 43 mm23 parts2LCustom license1
How designs wire the SN74LVC1G125DBVR
Read from the KiCad layouts of 36 open source designs, one per repository: what each pin of the SN74LVC1G125DBVR connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 22 of 36 designs, most often 100 nF (then 1 µF).
- The A pin has a pull-up to 3.3V on 19 of 36 designs, most often 10 kΩ (then 2 kΩ).
- The OE pin has a resistor to GND on 16 of 36 designs, most often 3.3 kΩ (then 20 kΩ).
- The Y pin has a pull-up to VCC on 16 of 36 designs, most often 10 kΩ.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| OEpin 1 | Connected to: SN74LVC1G126DBVR 44% |
|
| Apin 2 | Connected to: SN74LVC1G126DBVR 44% |
|
| GNDpin 3 | Connected to: GND 97% | — |
| Ypin 4 | Connected to: The microcontroller 33%, a connector 25% |
|
| VCCpin 5 | Connected to: 3.3V 86% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Aero-Hand-Open-Left by Chestnut-Robotics, L0 Dynamixel by Luos-io, RPI CMx Carrier by lecejeff and Rioctrl controller by festlv.
The SN74LVC1G125DBVR in open source designs
The gallery holds 57 open source boards using the SN74LVC1G125DBVR from 36 GitHub repositories; a typical one measures about 68.6 × 70 mm and carries around 83 components.
58% are two-layer designs, the rest use four layers or more, and 54% carry an open source license.
The most starred is Aero-Hand-Open-Left by Chestnut-Robotics.
Parts used alongside the SN74LVC1G125DBVR
Microcontrollers on boards using the SN74LVC1G125DBVR
What boards using the SN74LVC1G125DBVR are built for
SN74LVC1G125DBVR: common questions
Where can I find a SN74LVC1G125DBVR reference design?
Each of the 57 boards on this page is a real design using the SN74LVC1G125DBVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the SN74LVC1G125DBVR VCC pin?
The VCC pin has a decoupling capacitor on 22 of 36 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 36 open source designs using the SN74LVC1G125DBVR.
What pull-up resistor is used on the SN74LVC1G125DBVR A pin?
The A pin has a pull-up to 3.3V on 19 of 36 designs, most often 10 kΩ (then 2 kΩ). Counted from the KiCad layouts of 36 open source designs using the SN74LVC1G125DBVR.
What resistor goes on the SN74LVC1G125DBVR OE pin?
The OE pin has a resistor to GND on 16 of 36 designs, most often 3.3 kΩ (then 20 kΩ). Counted from the KiCad layouts of 36 open source designs using the SN74LVC1G125DBVR.
What parts are used alongside the SN74LVC1G125DBVR?
The SN74LVC1G126DBVR, XIAO-ESP32-S3-DIP, SN74LVC1G04DBVR, INA226AIDGSR and USBLC6-2SC6 appear in the most repositories here.
Which microcontrollers do boards using the SN74LVC1G125DBVR use?
Most are built on ESP32 (26), STM32 (4), PIC (2) and Raspberry Pi (2).
How big is a typical board using the SN74LVC1G125DBVR?
The median is 68.6 × 70 mm, and 58% are two-layer designs.
What is the most popular open source board using the SN74LVC1G125DBVR?
By GitHub stars, Aero-Hand-Open-Left by Chestnut-Robotics, with 1,054 stars.
Can I simulate one of these boards using the SN74LVC1G125DBVR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.