2 open source boards using the T20Q144C3
Real designs built with the T20Q144C3, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Econopet
DLehenbauer
262.5 × 108 mm284 parts2LCC0-1.018FLEADiP
dennowiggle
100 × 72 mm189 parts4LLGPL-2.12
The T20Q144C3 in open source designs
The gallery holds 2 open source boards using the T20Q144C3 from 2 GitHub repositories; a typical one measures about 181.3 × 90 mm and carries around 237 components.
50% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Econopet by DLehenbauer.
Microcontrollers on boards using the T20Q144C3
What boards using the T20Q144C3 are built for
T20Q144C3: common questions
Where can I find a T20Q144C3 reference design?
Each of the 2 boards on this page is a real design using the T20Q144C3. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the T20Q144C3 use?
Most are built on RP2040/RP2350 (1).
How big is a typical board using the T20Q144C3?
The median is 181.3 × 90 mm, and 50% are two-layer designs.
What is the most popular open source board using the T20Q144C3?
By GitHub stars, Econopet by DLehenbauer, with 18 stars.
Can I simulate one of these boards using the T20Q144C3 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.