HardLabs

Panel proto tracking comparator board

dgallant0x007·awoslog-adsbee·kicad/panel_proto_tracking_comparator_board/panel_proto_tracking_comparator_board.kicad_pcb

Panel proto tracking comparator board layout, top view — open source board by dgallant0x007

About the Panel proto tracking comparator board

Panel proto tracking comparator board is an open source PCB design by dgallant0x007, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 68 × 45 mm, with 8 components from 6 distinct parts.

By type, the board carries 4 resistors, 2 diodes and 2 capacitors.

It belongs with the rf & radio designs in this gallery.

From the project

ADSBee traffic pusher to awoslog.com

ADSBee 1090 is an open-source multi band radio receiver and decoder for ADS-B packets transmitted by aircraft and ground stations. ADSBee 1090 is based on an RP2040 microcontroller, and utilizes two independent PIO blocks to find and decode ADS-B messages without the need for an FPGA. ADSBee 1090 includes a radio receiver frontend with filtering and amplification, as well as a software defined comparator circuit with an adjustable trigger threshold for customizable receive sensitivity in a diverse range of RF environments.

Panel proto tracking comparator board, from the project README
From the project README

Panel proto tracking comparator board bill of materials (BOM)

8 components, 6 distinct parts.

QtyPartRefs
2
D_Schottky
D1, D2
1
0.1uF
C1
1
1nF
C3
1
10k
R1
2
100k
R2, R5
1
200k
R7

Panel proto tracking comparator board design files

The KiCad project lives in the dgallant0x007/awoslog-adsbee repository on GitHub; these links point at the commit this page was built from.

Panel proto tracking comparator board: common questions

How big is the Panel proto tracking comparator board?

The Panel proto tracking comparator board measures 68 × 45 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Panel proto tracking comparator board?

8 components, from 6 distinct parts. The full bill of materials is listed on this page.

Where can I download the Panel proto tracking comparator board design files?

From the dgallant0x007/awoslog-adsbee repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Panel proto tracking comparator board design in my own project?

Yes, under the terms of its GPL-3.0 license, which dgallant0x007 chose for the repository.

More boards in awoslog-adsbee

Similar boards