HardLabs

RF Detector Board

dgallant0x007·awoslog-adsbee·kicad/proto_ads_bee_detector_board/proto_ads_bee_detector_board.kicad_pcb

RF Detector Board layout, top view — open source board by dgallant0x007

About the RF Detector Board

RF Detector Board is an open source PCB design by dgallant0x007, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 28 × 44 mm, with 24 components from 16 distinct parts.

Other key parts include the AD8314 and BGA2818. By type, the board carries 8 capacitors, 6 connectors, 4 resistors, 2 ICs, 2 crystals and 1 diode.

It belongs with the rf & radio designs in this gallery.

From the project

ADSBee traffic pusher to awoslog.com

ADSBee 1090 is an open-source multi band radio receiver and decoder for ADS-B packets transmitted by aircraft and ground stations. ADSBee 1090 is based on an RP2040 microcontroller, and utilizes two independent PIO blocks to find and decode ADS-B messages without the need for an FPGA. ADSBee 1090 includes a radio receiver frontend with filtering and amplification, as well as a software defined comparator circuit with an adjustable trigger threshold for customizable receive sensitivity in a diverse range of RF environments.

RF Detector Board, from the project README
From the project README

Main components on the RF Detector Board

AD8314BGA2818

RF Detector Board bill of materials (BOM)

24 components, 16 distinct parts.

QtyPartRefs
1
AD8314
U1
1
BGA2818
U2
2
SF2321D
X1, X2
2
132289
Conn_Coaxial
J1, J6
3
Conn_01x02_Male
J2, J3, J4
1
Conn_01x03_Male
J5
1
1N5819
40V 1A
D1
1
100nH
L1
1
22nF
C1
3
39pF
C2, C5, C8
1
DNP
C3
3
10uF
C4, C6, C7
1
10k
R1
1
52.3R
R2
1
20k
R3
1
10k
R4

RF Detector Board design files

The KiCad project lives in the dgallant0x007/awoslog-adsbee repository on GitHub; these links point at the commit this page was built from.

RF Detector Board: common questions

How big is the RF Detector Board?

The RF Detector Board measures 28 × 44 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the RF Detector Board?

24 components, from 16 distinct parts. The full bill of materials is listed on this page.

Where can I download the RF Detector Board design files?

From the dgallant0x007/awoslog-adsbee repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the RF Detector Board design in my own project?

Yes, under the terms of its GPL-3.0 license, which dgallant0x007 chose for the repository.

More boards in awoslog-adsbee

Similar boards