Proto data slicer board
About the Proto data slicer board
Proto data slicer board is an open source PCB design by dgallant0x007, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 14 × 12.5 mm, with 13 components from 8 distinct parts.
Other key parts include the MCP6566. By type, the board carries 8 resistors, 4 capacitors and 1 IC.
It belongs with the rf & radio designs in this gallery.
From the project
ADSBee traffic pusher to awoslog.com
ADSBee 1090 is an open-source multi band radio receiver and decoder for ADS-B packets transmitted by aircraft and ground stations. ADSBee 1090 is based on an RP2040 microcontroller, and utilizes two independent PIO blocks to find and decode ADS-B messages without the need for an FPGA. ADSBee 1090 includes a radio receiver frontend with filtering and amplification, as well as a software defined comparator circuit with an adjustable trigger threshold for customizable receive sensitivity in a diverse range of RF environments.
Main components on the Proto data slicer board
Proto data slicer board bill of materials (BOM)
13 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP6566 | SOT-353_SC-70-5 | U1 |
| 1 | 100pF | C_0603_1608Metric | C1 |
| 1 | 0.1uF | C_0603_1608Metric | C2 |
| 1 | 3pF | C_0603_1608Metric | C3 |
| 1 | 10nF | C_0603_1608Metric | C4 |
| 3 | 10k | R_0603_1608Metric | R1, R3, R4 |
| 2 | 1M | R_0603_1608Metric | R2, R5 |
| 3 | 1k | R_0603_1608Metric | R6, R7, R8 |
Proto data slicer board design files
The KiCad project lives in the dgallant0x007/awoslog-adsbee repository on GitHub; these links point at the commit this page was built from.
Proto data slicer board: common questions
How big is the Proto data slicer board?
The Proto data slicer board measures 14 × 12.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Proto data slicer board?
13 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the Proto data slicer board design files?
From the dgallant0x007/awoslog-adsbee repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Proto data slicer board design in my own project?
Yes, under the terms of its GPL-3.0 license, which dgallant0x007 chose for the repository.
More boards in awoslog-adsbee
RF Detector Board
28 × 44 mm24 parts2LGPL-3.00
RP2040/RP2350Proto ads bee mcu board
55 × 58 mm20 parts2LGPL-3.00
Proto ads bee rf board
44 × 28 mm16 parts2LGPL-3.00
Panel proto data slicer board
56 × 37.5 mm13 parts2LGPL-3.00
Panel proto lna board
69 × 44 mm12 parts2LGPL-3.00
Proto lna board
23 × 11 mm12 parts2LGPL-3.00
Panel proto tracking comparator board
68 × 45 mm8 parts2LGPL-3.00
Proto ufl match board
23 × 8 mm7 parts2LGPL-3.00
Proto amp bodge board
13 × 13 mm6 parts2LGPL-3.00
Proto ufl pi board
19 × 8 mm5 parts2LGPL-3.00
Panel saw eval board
57 × 44 mm3 parts2LGPL-3.00
Similar boards
Hat
pa3gsb
65 × 56 mm81 parts2LNo license675
Radioberry juice
65 × 56 mm87 parts2LNo license675
Radioberry preamp
65 × 56 mm137 parts2LNo license675
Hermes-Lite Small IO Expansion
softerhardware
18.4 × 12.5 mm6 parts2LNo license372
Hermes-Lite Jumper With IO
21.9 × 51.7 mm12 parts2LNo license372
Hermes-Lite PureSignal Feedback
17.1 × 15.4 mm6 parts2LNo license372