HardLabs

Proto ads bee mcu board

dgallant0x007·awoslog-adsbee·kicad/proto_ads_bee_mcu_board/proto_ads_bee_mcu_board.kicad_pcb

Proto ads bee mcu board layout, top view — open source RP2040/RP2350 board by dgallant0x007

About the Proto ads bee mcu board

Proto ads bee mcu board is an open source RP2040/RP2350 PCB design by dgallant0x007, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 55 × 58 mm, with 20 components from 14 distinct parts.

Its main chip is the SC0915, from the RP2040/RP2350 family. Other key parts include the MCP6541. By type, the board carries 7 resistors, 5 connectors, 4 capacitors, 2 ICs and 1 transistor.

It belongs with the rf & radio designs in this gallery.

From the project

ADSBee traffic pusher to awoslog.com

ADSBee 1090 is an open-source multi band radio receiver and decoder for ADS-B packets transmitted by aircraft and ground stations. ADSBee 1090 is based on an RP2040 microcontroller, and utilizes two independent PIO blocks to find and decode ADS-B messages without the need for an FPGA. ADSBee 1090 includes a radio receiver frontend with filtering and amplification, as well as a software defined comparator circuit with an adjustable trigger threshold for customizable receive sensitivity in a diverse range of RF environments.

Proto ads bee mcu board, from the project README
From the project README

Main components on the Proto ads bee mcu board

SC0915MCP6541

Proto ads bee mcu board bill of materials (BOM)

20 components, 14 distinct parts.

QtyPartRefs
1
SC0915
Pico
U1
1
MCP6541
U2
1
2N7002
Q1
1
4048
Conn_ARM_JTAG_SWD_10
J1
1
Conn_01x03_Pin
J2
2
Conn_01x02_Pin
J3, J5
1
Conn_01x04_Pin
J4
1
10k
RV1
3
0.1uF
C1, C2, C4
1
1uF
C3
3
10k
R1, R2, R4
1
1k
R3
1
100
R5
2
4.99k
R6, R7

Proto ads bee mcu board design files

The KiCad project lives in the dgallant0x007/awoslog-adsbee repository on GitHub; these links point at the commit this page was built from.

Proto ads bee mcu board: common questions

What microcontroller does the Proto ads bee mcu board use?

The Proto ads bee mcu board is built around the SC0915, from the RP2040/RP2350 family.

How big is the Proto ads bee mcu board?

The Proto ads bee mcu board measures 55 × 58 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Proto ads bee mcu board?

20 components, from 14 distinct parts. The full bill of materials is listed on this page.

Where can I download the Proto ads bee mcu board design files?

From the dgallant0x007/awoslog-adsbee repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Proto ads bee mcu board design in my own project?

Yes, under the terms of its GPL-3.0 license, which dgallant0x007 chose for the repository.

Can I test firmware for the Proto ads bee mcu board without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in awoslog-adsbee

Similar boards