HardLabs

Proto amp bodge board

dgallant0x007·awoslog-adsbee·kicad/proto_amp_bodge_board/proto_amp_bodge_board.kicad_pcb

Proto amp bodge board layout, top view — open source board by dgallant0x007

About the Proto amp bodge board

Proto amp bodge board is an open source PCB design by dgallant0x007, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 13 × 13 mm, with 6 components from 5 distinct parts.

Other key parts include the OPA358AIDCKR. By type, the board carries 3 resistors, 2 capacitors and 1 IC.

It belongs with the rf & radio designs in this gallery.

From the project

ADSBee traffic pusher to awoslog.com

ADSBee 1090 is an open-source multi band radio receiver and decoder for ADS-B packets transmitted by aircraft and ground stations. ADSBee 1090 is based on an RP2040 microcontroller, and utilizes two independent PIO blocks to find and decode ADS-B messages without the need for an FPGA. ADSBee 1090 includes a radio receiver frontend with filtering and amplification, as well as a software defined comparator circuit with an adjustable trigger threshold for customizable receive sensitivity in a diverse range of RF environments.

Proto amp bodge board, from the project README
From the project README

Main components on the Proto amp bodge board

OPA358AIDCKR

Proto amp bodge board bill of materials (BOM)

6 components, 5 distinct parts.

QtyPartRefs
1
OPA358AIDCKR
U1
1
0.1uF
C1
1
22nF
C2
2
10k
R1, R2
1
100k
R3

Proto amp bodge board design files

The KiCad project lives in the dgallant0x007/awoslog-adsbee repository on GitHub; these links point at the commit this page was built from.

Proto amp bodge board: common questions

How big is the Proto amp bodge board?

The Proto amp bodge board measures 13 × 13 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Proto amp bodge board?

6 components, from 5 distinct parts. The full bill of materials is listed on this page.

Where can I download the Proto amp bodge board design files?

From the dgallant0x007/awoslog-adsbee repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Proto amp bodge board design in my own project?

Yes, under the terms of its GPL-3.0 license, which dgallant0x007 chose for the repository.

More boards in awoslog-adsbee

Similar boards